For a wood stove with a rear exhaust outlet, the right connector depends on the stove’s flue diameter, the route to the chimney, and the clearances required by the stove and venting-system manuals. These five 6-inch DuraVent and Yaocom parts can help form a vent connection, but they are not complete chimney systems or universal rear-outlet adapters. DuraVent’s adjustable double-wall options suit users matching compatible DVL components, while the Yaocom telescoping pipe is a single-wall option for users who need adjustable length.
| Product | Best suited for | Listed type or feature |
|---|---|---|
| DuraVent DVL 6DVL-24 | A compatible DVL connection | Double-wall pipe |
| Yaocom telescoping pipe | Adjustable single-wall length | 16–30-inch range in product name |
| DuraVent DuraBlack elbow | A 90-degree turn | Single-wall elbow |
| DuraVent adjustable connector | A stove-to-ceiling connection | Double-wall, adjustable |
| DuraVent DVL 6DVL-68TA | A longer adjustable connection | 40–68-inch adjustment |
DuraVent DVL 6DVL-24 Double-Wall Pipe
This 6-inch DVL pipe is best for buyers assembling a compatible double-wall vent connection and who need a 24-inch section. Its listed features describe a double-wall construction intended to maintain higher flue-gas temperatures and support a steady draft. The product listing also says it vents exhaust from wood, oil, coal, and gas appliances.
Why it was selected: It is a clearly identified double-wall pipe section for building a vent route from a stove, including a setup that may begin at a rear outlet. Limitation: It is a straight pipe, not a rear-exit adapter, elbow, or complete chimney. Confirm system compatibility and required clearances before purchase.
Yaocom 6-Inch Telescoping Stove Pipe
The Yaocom is best for a buyer seeking a 6-inch single-wall connector with an adjustable length. Its product name specifies telescoping adjustment from 16 to 30 inches, which can help when the measured connection does not match a fixed-length pipe.
Why it was selected: Adjustable length addresses a common layout challenge when connecting a rear-exit stove to the next vent component. Limitation: The supplied product information does not list additional material, clearance, or system-compatibility details. Verify those specifications and confirm that single-wall pipe is permitted for the planned location.
DuraVent DuraBlack 90-Degree Elbow
This 6-inch, 90-degree single-wall elbow is best for buyers whose vent plan requires a right-angle turn. It is listed as 24-gauge 430 stainless steel. The DuraBlack line uses die-formed fittings and adjustable lengths, and the listing says the fittings do not require cutting or crimping at the ends.
Why it was selected: A rear outlet often needs a change in direction, and this product is explicitly an elbow rather than a straight connector. Limitation: It is single-wall, so check the stove and vent manuals for allowed use and combustible clearances. It does not by itself complete a rear-exhaust installation.
DuraVent Adjustable Double-Wall Connector
This DuraVent double-wall finishing connector is best for a buyer whose layout needs a bridge between the stove and a ceiling support box or finishing collar. The listing describes a two-piece arrangement and adjustable, die-formed fittings designed to avoid cutting or crimping.
Why it was selected: Its stated connecting role makes it relevant when a rear-exhaust route transitions toward a ceiling support. Limitation: It is a connector, not a complete chimney or a specified rear-outlet adapter. Match it to the vent system and appliance instructions rather than assuming it fits every stove.
DuraVent DVL 6DVL-68TA Adjustable Pipe
This 6-inch double-wall DVL connector is best for buyers who need an adjustable longer section. The listing gives a 40-to-68-inch adjustment range and a no-cut design. It describes the pipe as connecting a wood stove to a ceiling support box or finishing collar.
Why it was selected: The extended adjustment range can suit layouts where a shorter connector will not span the measured distance. The listing specifies 18 inches of clearance to combustibles. Limitation: That clearance is a product-listing detail, not a substitute for checking the appliance and full vent-system instructions.
Buying Guide: Choosing Rear-Exhaust Stove Pipe
How do you confirm a pipe fits a rear outlet?
Measure the stove’s outlet and check its manual for the required connector diameter and permitted orientation. A product labeled 6 inches is not automatically a fit for every stove. Also verify whether the outlet needs an adapter or elbow; none of these products is explicitly described as a universal rear-outlet adapter.
Should you choose single-wall or double-wall pipe?
Compare the installation location, required clearances, and the stove manufacturer’s instructions. The Yaocom and DuraBlack elbow are listed as single-wall products. The DVL options are double-wall. Do not select based on wall type alone: confirm that the product belongs to the intended venting arrangement.
When is an adjustable section useful?
Adjustable pipe can help bridge a measured gap without cutting, where the product’s stated range suits the layout. The Yaocom lists 16–30 inches, while the DVL 6DVL-68TA lists 40–68 inches. Measure the required connection and check each component’s fitting method before ordering.
What else should buyers verify?
- Confirm the vent brand or product-line compatibility required by the system.
- Check clearances to combustible materials in the relevant manuals.
- Plan the number and direction of turns before choosing elbows and straight sections.
- Determine whether the installation also requires chimney components, support parts, or a finishing collar.
- Have the complete vent route reviewed or installed according to applicable instructions and local requirements.
Frequently Asked Questions
Can these products connect directly to every rear-exhaust wood stove?
No. Fit depends on the outlet diameter, stove instructions, and vent-system compatibility. Confirm whether an adapter is needed.
Is a stove pipe the same as a complete chimney?
No. These listings describe pipe, an elbow, or connectors. A complete installation may require additional compatible vent and support components.
Which option is adjustable from 16 to 30 inches?
The Yaocom 6-inch single-wall telescoping pipe has that range in its product name.
Which product is an elbow for changing direction?
The DuraVent DuraBlack product is a 6-inch, 90-degree single-wall elbow.
Does the DVL 6DVL-68TA list a clearance requirement?
Yes. Its product information specifies 18 inches of clearance to combustibles. Check the stove and vent instructions for the full installation requirements.