For outdoor rubber flooring, choose tiles based on the job: thick Playsafer Elevate tiles are aimed at playground cushioning, Playsafer Brick tiles suit a stable interlocking surface, and MAXWAVE PVC tiles are designed for drainage in wet areas. The right option depends on required coverage, tile thickness, drainage, and whether you need impact cushioning or a simple non-slip surface. Compare the five options below and confirm installation and safety requirements for your specific site before buying.
| Product | Best suited for | Key distinction |
|---|---|---|
| Playsafer Elevate, 2-inch | Thick playground or exercise-area padding | 20-by-20-inch tiles |
| Playsafer Brick | Outdoor paths and family spaces | Hidden interlocking system |
| Playsafer Elevate, 1-inch | Play areas needing a thinner tile | Porous design and stated fall-height rating |
| Playsafer Elevate, 2.75-inch | Larger playground installations | Bulk set covering 158 square feet |
| MAXWAVE PVC drainage tiles | Wet decks, pool areas, and sheds | Drainage supports and 18-tile set |
Playsafer Elevate 2-Inch Rubber Tiles

This option is best for buyers prioritizing a thicker tile for a playground, play area, or exercise equipment zone. The listing specifies high-density, shock-absorbent rubber and 20-by-20-inch tiles that are 2 inches thick. The two-tile set covers 5.5 square feet, making it more suitable for a small area or a measured project than an expansive installation.
Why it was selected: Its stated thickness and intended safety-surface uses distinguish it from thinner patio and drainage tiles. Limitation: The provided listing details do not state a fall-height rating, so do not assume a particular level of playground protection.
Playsafer Brick Interlocking Rubber Tiles

Choose this set if you want 16-by-16-inch rubber pavers for indoor or outdoor use. Its hidden interlock system is intended to create a connected surface with a seamless appearance. The product listing also describes the rubber as weather-resistant, comfortable, and slip-resistant, which makes it a candidate for family-friendly outdoor spaces.
Best for: Buyers who want a connected paver layout without prominent visible connectors. Why it was selected: It combines outdoor-use positioning with a secure interlock design. Limitation: The supplied details do not specify tile thickness or impact-protection performance; choose a different product if those measurements are essential.
Playsafer Elevate 1-Inch Playground Tiles

This 20-by-20-inch tile is best for buyers who want a thinner playground or exercise-area tile. The listing describes high-density construction, porous drainage, and a claimed fall-height protection rating of up to 4 feet. It also states that the tile contains 50% EPDM and is fade-free guaranteed.
Why it was selected: It provides specific drainage and fall-height information that helps buyers compare playground-oriented choices. Check that the stated rating fits the equipment and installation conditions at your site. Limitation: At 1 inch thick, it is thinner than the 2-inch and 2.75-inch Elevate options.
Playsafer Elevate 2.75-Inch Tile Set

This is best for buyers planning a larger playground or exercise-area installation and seeking the thickest listed Elevate option. The product name specifies 20-by-20-inch tiles, 2.75-inch thickness, and a set covering 158 square feet. Those details make it easier to estimate coverage for a broader project.
Why it was selected: It offers substantial stated coverage and greater thickness than the other Elevate sizes here. Limitation: The supplied product details do not include a fall-height rating, so verify safety specifications before using it beneath playground equipment.
MAXWAVE PVC Interlocking Drainage Mats

Choose these 12-by-12-inch modular tiles for damp or ventilated areas such as decks, pool spaces, showers, sheds, and basements. The 18-piece set uses thickened PVC, a non-slip surface, and 0.58-inch support pins designed to help water run off. The tiles connect with adjoining male and female edges and can be cut to fit, according to the listing.
Best for: Buyers who need drainage and a cushioned surface rather than thick playground impact padding. Limitation: These are PVC tiles, not rubber tiles, and the supplied details do not give a total coverage figure.
Buying Guide: How To Choose Outdoor Floor Tiles
Do you need cushioning or drainage?
For play equipment or exercise areas, compare the rubber Elevate tiles by thickness and confirm any required impact rating. For places where water needs to pass beneath the surface, the MAXWAVE tiles specifically describe drainage supports. Playsafer Brick is positioned as an outdoor rubber paver with a hidden interlock system, rather than a product with a stated fall-height rating.
How much area do you need to cover?
Measure the installation footprint before choosing a set. Compare stated coverage—not only tile count—because tile dimensions differ. The 2-inch Elevate set covers 5.5 square feet, while the 2.75-inch set states 158 square feet. The supplied details for the other options do not include a complete set coverage figure.
What should you verify before installation?
- Confirm tile dimensions, thickness, and coverage against your measurements.
- Check whether the product’s stated use matches the surface and activity.
- For playgrounds, verify the relevant fall-height requirements and installation conditions rather than assuming thickness alone ensures protection.
- For wet areas, consider drainage, slip resistance, and whether the material is rubber or PVC.
Frequently Asked Questions
Are rubber floor tiles suitable for outdoor use?
Several products here are listed for outdoor use or outdoor-oriented areas. Check the individual product’s stated materials and intended applications before selecting tiles for a specific site.
Which option is designed for playground cushioning?
The Playsafer Elevate rubber tiles are marketed for playgrounds and exercise equipment. The 1-inch version specifically lists a fall-height rating of up to 4 feet; verify that rating against your project’s needs.
Which tiles are designed to drain water?
The MAXWAVE modular PVC tiles list 0.58-inch support pins intended to help water run off. The 1-inch Playsafer Elevate tile is also described as porous for drainage.
Are all five products made of rubber?
No. The MAXWAVE product is made from PVC according to its listing. The other four products are identified as rubber tiles or pavers.