Replacing kitchen cabinet fronts can mean swapping drawer panels, cabinet doors, or hardware that holds a false front in place. The best choice depends on the part you are replacing and its exact measurements. These five options include unfinished pine drawer and door fronts for custom finishing, clips for sink false fronts, and adjustable hinges for bi-fold corner doors. Measure the existing front and check its style and mounting requirements before ordering.
| Product | Best For | Key Detail |
|---|---|---|
| Cinnvoice drawer fronts | Two wide, short drawer fronts | 23.5 x 6 inches; unfinished pine |
| Sintuff drawer fronts | Several standard-size drawers | Five 18 x 8-inch panels and handles |
| Unfinished cabinet doors | Two Shaker-style doors | 12 x 24 inches; includes four hinges |
| Tenn-Tex false-front clips | Sink or false drawer fronts | For openings at least 4.25 inches high |
| HJ corner hinges | Bi-fold Lazy Susan doors | 135-degree opening; adjustable |
Cinnvoice Unfinished Drawer Fronts
This two-panel set is best for replacing wide, shallow drawer fronts that measure approximately 23.5 inches wide by 6 inches high. The panels are made of solid pine and arrive pre-sanded, so they can be painted or stained to coordinate with surrounding cabinets.
Choose this option if your measured drawer-front dimensions match and you want to select the finish yourself. The listing says the panels are not pre-drilled, so plan to mark and make any required mounting holes. Confirm dimensions before purchase; these fronts are not a universal fit.
Sintuff Five-Piece Drawer Front Set
Sintuff’s set is best for a project replacing several drawer fronts with panels around 18 by 8 inches. It includes five pine panels, each about 0.79 inches thick, and five door handles. The unfinished wood can be painted or stained for a coordinated look across multiple drawers.
Choose this set when the quantity and listed dimensions suit your cabinet layout. The product description presents the panels as fitting various drawer frames, but you should still compare each panel with your existing fronts and mounting arrangement. The listing does not specify pre-drilled mounting holes, so check what preparation your installation requires.
Unfinished Shaker Cabinet Door Pair
This pair is best for replacing two cabinet doors when each opening calls for a 12-by-24-inch front. The doors are made from unfinished solid pine and arrive sanded, allowing you to paint, stain, or seal them. The package also includes four hinges.
Choose these doors if you want a Shaker-style front and the stated size matches your cabinet. The listing describes them as 12 by 24 by 0.8 inches, so verify both dimensions and hinge placement against your existing doors before ordering. Unfinished wood needs a suitable final finish; the listing does not say that the doors arrive painted or sealed.
Tenn-Tex False Front Clips
These clips are best for securing a false drawer front, often used at a sink cabinet, rather than replacing a working drawer box. The kit contains two male and two female connectors, eight wood screws, and installation instructions. It is specified for false fronts with an opening height of at least 4.25 inches.
Choose this hardware if the front itself is usable and needs a mounting solution compatible with the listed opening requirement. Avoid choosing it as a replacement door or drawer panel: it provides clips and screws, not a cabinet front. Check the opening height and the way your existing front is constructed before installation.
HJ 135-Degree Corner Cabinet Hinges
These hinges are best for replacing hardware on a Lazy Susan corner cabinet with bi-fold doors. The two-pack is designed for 135-degree corner-door applications and has 3D, six-way adjustment for fine-tuning door position and gaps. The hinges are made of cold-rolled steel with a plated finish.
Choose them when your cabinet uses a compatible folded corner-door arrangement and you need adjustable replacement hinges. They are hardware, not replacement door fronts. Their stated 135-degree design is specific, so check your existing hinge type and door configuration rather than assuming they suit standard cabinet doors.
Buying Guide: How To Choose Replacement Cabinet Fronts
Are you replacing a door, drawer front, or false front?
Identify the part before shopping. Cabinet doors cover cabinet openings and use hinges. Drawer fronts attach to drawer boxes. A false front, commonly found at a sink, may be fixed in place and use clips rather than a drawer mechanism. The products above serve different purposes, so compare like with like.
What measurements should you check?
Measure the front’s width, height, and thickness, then compare those numbers with the product listing. For doors, also note the hinge location and opening direction. For drawer fronts, check how the panel attaches to the drawer box. Small dimension differences can affect alignment and coverage.
Should you choose unfinished wood?
Unfinished pine panels let you choose a paint or stain color, but they require finishing before or during installation. Consider whether you can match the existing cabinets, including color and sheen. If you are replacing several fronts, buying a consistent set can make it easier to keep the finish uniform.
When should you replace hardware too?
Replace clips or hinges when the front is sound but the mounting hardware is damaged or unsuitable. Match specialized hardware to the cabinet’s configuration, such as a bi-fold corner door or a sink false front. Replacing the front alone may not solve a problem caused by worn or incompatible hardware.
Frequently Asked Questions
Can I replace just the kitchen cabinet fronts?
Yes. These products include separate door and drawer fronts, as well as mounting hardware. Measure the existing parts and confirm that the new fronts can attach to your cabinet or drawer boxes.
Do unfinished cabinet fronts need sanding?
The listed Cinnvoice and door-pair products are described as pre-sanded or sanded smooth. The Sintuff panels are described as unfinished, but their supplied surface preparation is not specified. Check the panel surface before applying paint or stain.
Are false-front clips the same as drawer slides?
No. The Tenn-Tex kit is for mounting false fronts. Its listing does not describe drawer slides or hardware for a functioning drawer.
How do I know if the corner hinges will fit?
Check that your cabinet uses a bi-fold Lazy Susan door and compare the existing hinge configuration with the listed 135-degree design. Do not assume these specialized hinges fit a standard single cabinet door.