The PERLESMITH mount has the longest listed extension in this selection at 42.72 inches, making it a strong fit for recessed spaces and corner viewing. For large, heavy TVs, consider the Perlegear mount with a 40.1-inch reach and 150-pound capacity. The BONTEC 40.9-inch model suits 32- to 75-inch TVs, while the ELIVED and BONTEC 37.4-inch mounts are options for smaller screens.
| Mount | Maximum Extension | TV Size Range | Listed Weight Capacity |
|---|---|---|---|
| PERLESMITH Long Arm | 42.72 inches | 42–90 inches | 150 pounds |
| BONTEC 40.9-inch Arm | 40.9 inches | 32–75 inches | 132 pounds |
| Perlegear PGXLF02 | 40.1 inches | 42–97 inches | 150 pounds |
| ELIVED Long Arm | 37.4 inches | 26–65 inches | 77 pounds |
| BONTEC 37.4-inch Arm | 37.4 inches | 26–65 inches | 77 pounds |
PERLESMITH Long Arm Full Motion TV Mount
Best for maximum reach: This mount extends 42.72 inches, the longest stated reach among the selected products. It fits most 42- to 90-inch TVs, supports up to 150 pounds, and accommodates VESA patterns from 200 x 100 mm to 800 x 400 mm. Its reach is useful for corner placement or recessed spaces where a standard short arm may not bring the screen far enough into the room.
The mount swivels up to 90 degrees left or right. Cable management clips help route cords along the arm, and the listed installation options include 16- to 24-inch wood studs, concrete, or brick. Limitation: The listed TV range begins at 42 inches, so it is not intended for smaller screens.
BONTEC 40.9-Inch Corner TV Mount
Best for a long reach with broad mid-size TV coverage: This BONTEC model extends 40.9 inches and retracts to 2.6 inches. It fits 32- to 75-inch TVs, supports up to 132 pounds, and lists VESA compatibility from 200 x 100 mm to 600 x 400 mm. Choose it if you want a long arm but do not need the larger 42- to 97-inch screen range of the Perlegear heavy-duty option.
Its listed adjustments include 180-degree swivel, plus or minus 8-degree tilt, and plus or minus 3-degree leveling. It is designed for 16-inch wood studs, concrete, or brick. Limitation: The product information says not to mount it on drywall alone.
Perlegear PGXLF02 Heavy-Duty Long Arm Mount
Best for large, heavy TVs: This mount extends 40.1 inches and supports TVs up to 150 pounds. It is listed for 42- to 97-inch flat or curved TVs, with VESA patterns from 200 x 100 mm to 800 x 400 mm. Its range makes it a better fit than the smaller-screen models for many large-TV setups, including built-in cabinet and corner installations.
The arm retracts to 3.7 inches. The product details list installation on 8-, 12-, 16-, or 24-inch wood studs, as well as concrete or brick. Its construction is described as cold-rolled steel. Limitation: Check the TV’s VESA pattern and weight before purchase; drywall alone is not a listed installation surface.
ELIVED 37.4-Inch Long Arm TV Mount
Best for smaller TVs in corner layouts: The ELIVED extends 37.4 inches and fits most 26- to 65-inch TVs weighing up to 77 pounds. Its VESA range is 100 x 100 mm to 400 x 400 mm. The single-stud swivel design is described as suited to corner placement, making this a practical alternative to the longer, larger-TV mounts when your screen is within its size and weight limits.
It swivels up to 90 degrees in either direction, tilts up 5 degrees and down 15 degrees, and offers plus or minus 3-degree screen leveling. Limitation: Its 77-pound capacity is lower than the capacities of the three mounts above, so verify the TV’s weight.
BONTEC 37.4-Inch Full-Motion TV Mount
Best for flexible positioning on a smaller screen: This BONTEC mount extends 37.4 inches and retracts to 2.9 inches. It fits 26- to 65-inch TVs, supports up to 77 pounds, and accepts VESA patterns from 200 x 200 mm to 400 x 400 mm. It is a close comparison to the ELIVED model, but its listed VESA range starts at 200 x 200 mm rather than 100 x 100 mm.
The arm has a three-section, five-arm structure and four joints. It tilts from plus 5 to minus 10 degrees, swivels up to 90 degrees, and levels by plus or minus 4 degrees. Installation surfaces listed include wood studs, brick, and concrete. Limitation: The product information says not to install it on drywall alone.
Buying Guide: How To Choose A Long-Reach TV Mount
How much extension do you need?
Compare the stated maximum extension with the distance required to bring the TV into your viewing area. The PERLESMITH reaches 42.72 inches, followed by BONTEC at 40.9 inches and Perlegear at 40.1 inches. A longer arm can help position a screen away from a corner or recessed area, but measure the room and intended screen position before choosing.
Will the mount fit your TV?
Check four details: screen size, TV weight, VESA mounting pattern, and the wall structure. A mount’s listed size range alone does not confirm compatibility. Match the TV’s weight and VESA measurements to the product specifications, and confirm that the wall can support the installation.
Which movement features matter?
Swivel helps direct the screen toward different seats, while tilt can change the viewing angle. Post-install leveling can help correct minor alignment after the mount is attached. Compare the listed adjustment ranges if your room layout makes a particular direction or angle important.
What wall surfaces are supported?
Several products specify wood studs, concrete, or brick and caution against mounting on drywall alone. Follow the manufacturer’s installation instructions and use a suitable mounting surface. Do not assume a mount supports a wall type that is not listed.
Frequently Asked Questions
Which selected TV mount extends the farthest?
The PERLESMITH Long Arm mount lists a maximum extension of 42.72 inches.
Which mount is listed for the largest TVs?
The Perlegear PGXLF02 is listed for TVs from 42 to 97 inches and supports up to 150 pounds.
Can these mounts be installed on drywall alone?
The product details for several models explicitly say not to mount on drywall alone. Check the specific mount’s instructions and install it only on a supported surface.
What should I measure before buying?
Check your TV’s screen size, weight, VESA pattern, the wall’s construction, and the distance you need the arm to extend.