For an indoor faux brick wall, choose a panel based on how permanent you want the finish to be, how much wall you need to cover, and whether you prefer peel-and-stick PVC, foam panels, or individual thin-brick veneers. Commomy is best for a small, straightforward DIY project; Wall!Supply covers a larger area per pack; and the mineral-based veneers offer a different, more involved installation. The options below are decorative wall coverings, not all real brick.
| Product | Best for | Coverage per pack |
|---|---|---|
| Commomy 3D PVC Panels | Simple peel-and-stick installation | 12.92 sq. ft. |
| COMSTICKC PVC Panels | Small-format red brick look | About 9.7 sq. ft. |
| Vintage Red Thin Brick Veneers | Individual brick appearance | 14.2 sq. ft. |
| Wall!Supply EPS Panels | Covering a larger area | 25.84 sq. ft. |
| Gemstone Styrofoam Panels | Large panels and moisture resistance | Not stated |
Commomy 3D Faux Brick PVC Panels
Best for: A quick indoor accent wall or small DIY update. This set contains 10 thin, flexible PVC panels and covers 12.92 square feet. The faux-brick surface has a 3D texture, and the panels can be cut with scissors or a utility knife.
The peel-and-stick format is the main reason to choose this option: the listed features say no grout, glue, or additional tools are needed. It is a practical pick for shoppers who want a lightweight covering rather than masonry or a more involved tile-style installation.
Limitation: The product is explicitly described as not real brick. Check the coverage against your wall measurements before ordering, particularly if you need to cover a large area.
COMSTICKC Small Red Brick Panels
Best for: Buyers who want small-format orange-red faux brick with a peel-and-stick backing. Ten sheets cover approximately 9.7 square feet. The PVC panels have a touchable 3D texture and are described as paintable, water-resistant, thin, and flexible.
Choose this set when the smaller brick pattern suits your design and you want adhesive-backed panels for an indoor refresh. Its stated coverage makes it easier to compare with other options and estimate how many sets a wall may require.
Limitation: The listing notes that each simulated brick is smaller than an actual brick, at 5 by 1.8 inches. It also advises keeping the panels 12 inches away from stoves and fireplaces.
Vintage Red Thin Brick Veneers
Best for: Shoppers who prefer individual thin-brick pieces over a single printed or peel-and-stick panel. The box contains 100 veneers and covers 14.2 square feet. Each piece measures 2.36 inches wide by 8.66 inches long and is 0.15 inches thick.
The veneers are made from inorganic mineral powder and poly-acrylic binder, with a matte finish. They are described as flexible, lightweight, and easy to cut. Installation uses premixed tile adhesive applied with a notched trowel, so this is a better choice for someone prepared for a more involved project than a peel-and-stick update.
Limitation: Adhesive is part of the installation process, unlike the self-adhesive PVC choices. For kitchen use, the listing recommends spraying primer on the brick surface to help avoid stains and oil.
Wall!Supply Weathered Brown EPS Panels
Best for: Covering a larger indoor wall with lightweight panels. The four-pack covers 25.84 square feet, more area than the other products here with stated pack coverage. The panels use expanded polystyrene (EPS), an acrylic protective coating, and high-definition printing intended to create a weathered brown brick appearance.
Choose this product if coverage and a printed brick effect matter more than a small peel-and-stick sheet format. The listing describes it for solid interior surfaces and names living rooms, bedrooms, kitchens, and foyers as possible locations.
Limitation: The provided features do not specify a peel-and-stick backing or give individual panel dimensions. Confirm the attachment method and layout details before planning installation.
Gemstone Large Styrofoam Brick Panels
Best for: DIYers who want large-format panels that can be cut and shaped to fit a wall. The pack contains nine panels measuring 40 by 20 inches. The listed material is lightweight styrofoam, and the product features describe a realistic textured surface and moisture resistance for damp rooms such as bathrooms or basements.
This option is worth comparing when fewer, larger pieces suit your layout better than smaller tiles or thin sheets. The product is described for interior and exterior use, though this guide focuses on indoor applications.
Limitation: The supplied features do not state total coverage in square feet or specify a peel-and-stick backing. Confirm coverage and installation requirements before buying.
Buying Guide: How To Choose Indoor Faux Brick
Do you want peel-and-stick or adhesive installation?
Peel-and-stick PVC panels are the simplest match when you want a quick DIY covering without grout or separate glue. Commomy and COMSTICKC list adhesive backing. The thin brick veneers instead require premixed tile adhesive and a notched trowel, making them a better fit for buyers prepared for a more involved installation.
How much wall coverage do you need?
Measure the wall’s width and height, then multiply them to estimate its area in square feet. Compare that figure with each product’s stated coverage: 9.7 square feet for COMSTICKC, 12.92 for Commomy, 14.2 for the veneers, and 25.84 for Wall!Supply. Gemstone’s supplied features do not state total coverage, so check the listing before estimating quantities.
Which material and appearance fit your room?
Compare the listed materials and surface styles rather than treating all faux brick as interchangeable. PVC options are thin and flexible; the vintage red veneers use a mineral powder and binder; and the larger panels use EPS or styrofoam. Brick size, color, texture, and panel dimensions can change the finished look, so review those details against the wall and room.
What should you check before installing?
Confirm the intended surface and installation method in the product details. For COMSTICKC, follow the stated 12-inch clearance from stoves and fireplaces. For the thin brick veneers in a kitchen, the listing recommends primer to help avoid stains and oil. Do not assume that a product’s water resistance means it is suitable for every wet or high-heat location.
Frequently Asked Questions
Are faux brick wall panels real brick?
No. The Commomy and COMSTICKC panels are identified as not real brick. The other options are also decorative alternatives, with materials and installation methods that differ by product.
Which option covers the most area per pack?
Wall!Supply lists coverage of 25.84 square feet per four-pack, the largest stated coverage among these products.
Can faux brick panels be cut to fit?
Cutting is listed for Commomy, the thin brick veneers, and Gemstone panels. Commomy specifies scissors or a utility knife; the other listings describe cutting without giving the same tool detail.
Which option is described as water-resistant?
COMSTICKC lists water-resistant PVC, and Gemstone describes its styrofoam panels as moisture-resistant. Those descriptions do not establish suitability for every damp or wet location.
Do all of these products use peel-and-stick installation?
No. Commomy and COMSTICKC list peel-and-stick backing. The thin brick veneers require premixed tile adhesive, and the supplied features for Wall!Supply and Gemstone do not specify peel-and-stick installation.