Hammered brass cabinet hardware adds a textured, warm-metal accent to kitchen cabinets, dressers, and other furniture. For solid brass, consider KOPPALIVE’s 5-inch or 3-inch polished T-bar pulls; for a 10-pack in brushed gold, compare JIASENBAO’s zinc-alloy options. Jetland’s antique-brass pulls offer a more traditional arched shape. Before choosing, match the pull’s hole centers to your existing holes or installation plan.
| Product | Best For | Hole Centers | Material |
|---|---|---|---|
| KOPPALIVE Polished T-Bar Pull | Solid brass, larger drawers | 5 inches | Solid brass |
| JIASENBAO Brushed Gold Pull | Buying a 10-pack | 5 inches | Zinc alloy |
| KOPPALIVE Compact T-Bar Pull | Solid brass, smaller drawers | 3 inches | Solid brass |
| JIASENBAO Compact Pull | Brushed-gold 10-pack | 3 inches | Zinc alloy |
| Jetland Arched Pull | Antique-brass styling | 3 inches | Solid cast |
KOPPALIVE 5-Inch Solid Brass T-Bar Pulls
These six polished solid-brass pulls are best for buyers who want a substantial T-bar style and have cabinets or drawers with 5-inch hole centers. Each pull weighs 5.9 ounces and measures 6-7/8 inches long, with a 1/2-inch width and 1-5/16-inch projection. The hammered surface adds texture while the polished finish creates a brighter gold appearance.
Two M4 screw lengths are included: 1 inch and 1-3/4 inches. The listing says they can be used on material 1/2 to 1-1/2 inches thick. Choose this set for solid-brass construction and a larger pull; avoid it if your existing holes are spaced for a 3-inch handle.
JIASENBAO 5-Inch Brushed Gold Pulls
This 10-pack is best for buyers outfitting multiple cabinets with a coordinated brushed-gold look. The pulls are made of solid zinc alloy with an electroplated surface. They have 5-inch hole centers, a 6.73-inch overall length, and a 1.28-inch projection. The seller describes the edges as smooth and the design as having no open ends.
Choose this option when quantity and brushed finish are priorities. It is not solid brass, so buyers specifically seeking brass construction should compare the KOPPALIVE pulls instead. Confirm the 5-inch spacing before ordering, especially when replacing existing handles.
KOPPALIVE 3-Inch Solid Brass T-Bar Pulls
These six solid-brass pulls are best for smaller drawers or cabinets drilled with 3-inch hole centers. Each weighs 4.3 ounces and measures 4-13/16 inches long, 1/2 inch wide, and 1-5/16 inches in projection. The polished finish and hammered T-bar profile coordinate with the matching 5-inch version while fitting a shorter mounting span.
The pack includes 1-inch and 1-3/4-inch M4 screws for material thicknesses from 1/2 to 1-1/2 inches, according to the listing. Choose this model for solid brass at a compact size. Its 3-inch spacing will not directly match holes set 5 inches apart.
JIASENBAO 3-Inch Brushed Gold Pulls
This 10-pack is best for buyers who need several compact pulls in a brushed-gold finish. The zinc-alloy handles have an electroplated surface, 3-inch hole centers, a 4-11/16-inch overall length, and a 1-1/4-inch projection. Their dimensions make them a useful comparison against the KOPPALIVE 3-inch pull when choosing between a 10-pack and solid-brass construction.
Choose this set if the 3-inch spacing and brushed finish suit the project. The material is zinc alloy rather than solid brass, so it may not fit a material-specific buying preference.
Jetland Antique Brass Arched Pulls
Jetland’s six solid-cast pulls are best for buyers seeking an arched shape and antique-brass appearance rather than a straight T-bar. The listing describes a rustic handle with modern hammered texture. Each pull has 3-inch hole centers and an overall length of 4-3/16 inches, making it a compact option for furniture such as dressers and nightstands.
Choose this style when shape and antique-brass coloring matter more than a polished or brushed-gold look. Its shorter overall length and arched profile differ from the longer T-bar designs, so compare the dimensions with the furniture before selecting it.
Buying Guide: How To Choose Hammered Brass Cabinet Hardware
Which hole-center measurement should I choose?
Measure from the center of one mounting hole to the center of the other. The products here use either 3-inch or 5-inch spacing. Matching existing holes can simplify a replacement; changing spacing may require new drilling or a different pull. Do not rely on overall handle length as a substitute for hole-center measurement.
Should I choose solid brass or zinc alloy?
The two KOPPALIVE options are listed as solid brass and have polished finishes. The JIASENBAO options are zinc alloy with electroplated brushed-gold surfaces. Jetland is described as solid cast and has an antique-brass finish. Compare the listed material and finish with your project priorities rather than treating all gold-toned hardware as brass.
How do finish and shape affect the look?
Polished gold T-bars provide a brighter, straighter profile. Brushed-gold pulls offer a less polished appearance, while Jetland’s antique-brass arched handles have a more traditional outline. Hammered texture appears across the listed options, but the overall shape and finish still create meaningful visual differences.
What should I check before installing?
Compare hole spacing, pull length, projection, and door or drawer thickness. For the KOPPALIVE products, check whether the included 1-inch or 1-3/4-inch M4 screw suits the listed thickness range. For other products, review the listing for mounting details not provided in the product information here.
Frequently Asked Questions
What does 3-inch or 5-inch hole center mean?
It is the distance between the centers of the two mounting holes. Match this measurement to existing holes when replacing hardware.
Are all these pulls made of brass?
No. KOPPALIVE lists solid brass, JIASENBAO lists zinc alloy, and Jetland describes its pulls as solid cast.
Which option comes in a 10-pack?
Both JIASENBAO products are listed as 10-packs: one has 5-inch spacing and the other has 3-inch spacing.
Which product has an arched shape?
The Jetland pull is described as arched and has an antique-brass finish with 3-inch hole centers.
Can I use a 3-inch pull to replace a 5-inch pull without drilling?
Not if the existing mounting holes are 5 inches apart. The hole-center measurements need to match for a direct replacement.