The best extra long TV wall mount depends on how far the screen must reach, its size and weight, and the mounting surface. For a 37.4-inch reach on a smaller TV, consider ELIVED or BONTEC; Perlegear offers that reach with a stated 110-pound capacity. For larger TVs, WHYFONE reaches 48 inches, while FORGING MOUNT reaches 43 inches and supports TVs up to 110 pounds.
| Mount | Maximum Extension | TV Size Range | Listed Weight Limit |
|---|---|---|---|
| ELIVED | 37.4 inches | 26–65 inches | 77 pounds |
| BONTEC | 37.4 inches | 26–65 inches | 77 pounds |
| WHYFONE | 48 inches | 37–85 inches | 110 pounds |
| FORGING MOUNT | 43 inches | 42–80 inches | 110 pounds |
| Perlegear | 37.4 inches | 32–65 inches | 110 pounds |
ELIVED 37.4-Inch Long Arm TV Mount
ELIVED is best for buyers with a 26-to-65-inch TV who want a long reach and broad positioning range, particularly in a corner setup. Its arm extends 37.4 inches and retracts to 3 inches, so the TV can move outward for viewing and sit close to the wall when not in use.
The mount supports TVs up to 77 pounds and VESA patterns from 100x100mm to 400x400mm. It swivels up to 90 degrees left or right, tilts up 5 degrees and down 15 degrees, and offers plus-or-minus 3-degree screen leveling. Its single-stud swivel design is a stated feature for corner placement.
Limitation: The 77-pound maximum and 65-inch size ceiling make it a poor match for TVs outside those limits. Check the TV’s weight and VESA pattern before choosing it.
BONTEC 37.4-Inch Full-Motion Mount
BONTEC is best for a 26-to-65-inch flat or curved TV when the installation calls for a long-reach articulating arm. It extends 37.4 inches and retracts to 2.9 inches. The listed four-joint, three-section five-arm structure is designed to adjust the screen position for different room layouts.
It supports up to 77 pounds and lists VESA compatibility from 200x200mm to 400x400mm. The mount swivels plus or minus 90 degrees, tilts up 5 degrees or down 10 degrees, and levels plus or minus 4 degrees. Its listed wall surfaces include wood studs, brick, and concrete.
Limitation: The listed VESA range starts at 200x200mm, so confirm the TV’s pattern rather than assuming smaller patterns will fit. The product information specifically says it is not for drywall.
WHYFONE 48-Inch Heavy-Duty TV Mount
WHYFONE is best for larger screens and rooms where a 37.4-inch arm may not reach far enough. Its 48-inch maximum extension is the longest listed among these five options. The mount is specified for 37-to-85-inch flat or curved LCD, LED, OLED, and QLED TVs, with a maximum weight of 110 pounds.
The product lists a maximum VESA pattern of 600x400mm and a retractable arm depth of 5.47 inches. The manufacturer describes a heavy-duty carbon-steel construction and an unsplit wallplate and arm design. Those details make it a candidate for large-screen setups, including the larger TV sizes specifically mentioned in the product information.
Limitation: Its listed minimum TV size is 37 inches, and the arm retracts farther from the wall than some other options here. Verify the TV’s VESA pattern and weight before purchase.
FORGING MOUNT 43-Inch Extension Mount
FORGING MOUNT is best for buyers who need more reach than a 37.4-inch arm provides but do not need the listed 48-inch reach of the WHYFONE. It extends up to 43 inches and fits TVs from 42 to 80 inches. The product lists a maximum load of 110 pounds and heavy-duty alloy-steel construction.
For viewing adjustments, it swivels plus or minus 90 degrees, tilts up 5 degrees or down 10 degrees, and provides plus-or-minus 3-degree leveling. This combination makes it a flexible choice for viewing from different areas in a living room, bedroom, or entertainment space.
Limitation: The provided product details do not state a VESA range or compatible wall surfaces. Confirm those specifications with the seller and the TV’s mounting information before selecting this mount.
Perlegear 37.4-Inch Long Arm Mount
Perlegear is best for buyers seeking a 37.4-inch reach with a higher stated weight capacity than the ELIVED and BONTEC options. It fits most 32-to-65-inch TVs with VESA patterns from 100x100mm to 400x400mm and supports up to 110 pounds, according to the supplied product details.
The arm retracts to 2.6 inches and swivels plus or minus 90 degrees. It has tool-free tilt adjustment from 5 degrees up to 15 degrees down and plus-or-minus 3-degree leveling after installation. The listing specifies installation on a single wood stud or solid concrete wall.
Limitation: Perlegear says this mount cannot be installed on drywall alone. Check the TV’s weight, size, and VESA pattern, and make sure the installation surface matches the stated requirements.
Buying Guide: How To Choose An Extra Long TV Mount
How much extension do you need?
Measure the distance the screen must travel from the wall to reach the intended viewing position. A 37.4-inch arm suits many corner and repositioning needs; 43- and 48-inch options provide more reach for larger rooms or spaces where the screen must move farther. Also compare the retracted depth if keeping the TV close to the wall matters.
Will the mount fit your TV?
Compare the TV’s screen size, weight, and VESA hole pattern with the mount’s listed limits. A mount’s maximum TV size alone does not confirm compatibility. For example, BONTEC lists VESA patterns from 200x200mm, while ELIVED and Perlegear list patterns beginning at 100x100mm. Check all three specifications before purchase.
What should you know about installation?
Confirm that the intended wall surface is supported. BONTEC lists wood studs, brick, and concrete but excludes drywall. Perlegear specifies a single wood stud or solid concrete and says not to install on drywall alone. The supplied details for some other models do not specify wall types, so verify their installation requirements before buying.
Which adjustments matter for your room?
Swivel helps direct the screen toward different seating positions. Tilt can help change the viewing angle, while leveling adjustment can straighten the screen after installation. Compare the specific adjustment ranges if the TV will sit in a corner or serve viewers across a wide room.
Frequently Asked Questions
What is the longest extension listed here?
The WHYFONE mount has the longest listed extension at 48 inches. FORGING MOUNT extends up to 43 inches, while ELIVED, BONTEC, and Perlegear each list 37.4 inches.
Which listed mount supports the most weight?
WHYFONE, FORGING MOUNT, and Perlegear each list a maximum capacity of 110 pounds. ELIVED and BONTEC list a maximum of 77 pounds.
Can an extra long TV mount go on drywall alone?
Do not assume so. BONTEC excludes drywall, and Perlegear says it cannot be installed on drywall alone. Check the installation instructions and wall requirements for the exact mount.
Should I choose a mount based only on TV size?
No. Confirm the TV’s weight and VESA pattern as well as its screen size. The mounting surface and the reach needed for your room also affect which mount is suitable.