The right door hardware depends on whether you need to fix a latch or build a sliding-door opening. For latch repairs, the standard strike plate with a shim is best for adjusting clearance, while the black and silver extended-lip plates offer a two-piece replacement option. For pocket door projects, the JUBEST kit suits wider doors and higher stated weight capacity; the EaseLife kit fits narrower, lighter doors. Compare dimensions and door requirements before choosing.
| Product | Best For | Key Detail |
|---|---|---|
| Standard Strike Plate with Shim | Latch alignment adjustments | Shim and wood dowels included |
| Black Extended-Lip Strike Plates | Two-plate replacement | Stainless steel, black finish |
| Silver Extended-Lip Strike Plates | Two-plate replacement | Stainless steel, silver finish |
| JUBEST Pocket Door Frame Kit | Wider or heavier pocket doors | 24–36-inch door width; up to 220 pounds |
| EaseLife Pocket Door Frame Kit | Narrower, lighter pocket doors | 24–30-inch door width; up to 88 pounds |
Standard Door Strike Plate With Shim
This replacement strike plate is best for a door that will not latch because of a small clearance change, seasonal movement, or an oversized screw hole. It is described as a standard-size replacement for strike openings with screw holes spaced 1-5/8 inches apart. The included stainless steel shim provides a way to adjust clearance without immediately modifying the jamb.
Three wood dowels are included to fill old screw holes when screws no longer hold securely. This makes the set a practical choice for repair work that involves both alignment and screw-hole issues. Check your existing strike opening and hole spacing before ordering; the stated standard shape does not establish that it fits every frame.
Black Extended-Lip Strike Plates
This two-piece set is best for replacing strike plates when a door latch no longer lines up neatly with the frame. Each plate measures 2-1/4 by 1-3/4 inches, and the package includes four 0.8-inch screws. The extended lip is intended to help address issues related to door shrinkage or frame misalignment.
The plates are made of stainless steel and have a black finish, so they are a useful option when that appearance suits the existing hardware. The listing describes them as a universal design for most locks, but dimensions and internal opening shape still matter. Measure the existing plate and latch opening before purchasing, since “universal” does not guarantee a match for every door.
Silver Extended-Lip Strike Plates
Choose this set if you want the same general extended-lip repair approach in a silver finish. The package contains two stainless steel plates measuring 2-1/4 by 1-3/4 inches, plus four 0.8-inch screws. Its stated use includes addressing latch problems caused by door shrinkage or frame misalignment.
This is best for buyers who need a pair of replacement plates and have confirmed that the plate dimensions and opening suit their door. The listed material is stainless steel, while the finish is silver. A potential limitation is that the product details do not provide every internal opening measurement in text, so compare the listing images or measure your existing hardware before installation.
JUBEST Pocket Door Frame Kit
This kit is best for a pocket-door project requiring a wider door range or a higher stated weight capacity. It is designed for a 2×4 stud wall and door panels 24 to 36 inches wide, 80 inches high, and 1 to 1-3/4 inches thick. The soft-close mechanism is specified for doors weighing up to 220 pounds, and the track can be cut to fit the panel width.
The listed construction includes a one-piece pine wood header and galvanized steel studs. Two-way soft closing is intended to dampen opening and closing. Verify your opening, wall framing, door thickness, and door weight against the specifications before installation. The product description does not say that a door panel is included.
EaseLife Pocket Door Frame Kit
This kit is best for a narrower, lighter pocket door. It fits 2×4 stud walls and is specified for door panels 24 to 30 inches wide, 80 inches high, and 1 to 1-3/4 inches thick. The stated maximum door weight is 88 pounds. Its aluminum track and two-way soft-close mechanism are designed for concealed sliding operation.
The track and wood slot kit can be cut to fit the stated door-width range. The package description lists the track, uprights, soft-close mechanism, rollers, and door stops; it also explicitly says the door is not included. Choose another option if your panel exceeds the listed width, thickness, or weight limits.
Buying Guide: How To Choose Door Frames And Hardware
Are you repairing a latch or installing a pocket door?
For a latch that misses the strike opening, start by checking whether the issue is clearance, alignment, or loose screws. The standard strike plate includes a shim and dowels for adjustment and screw-hole repair. The extended-lip sets provide two replacement plates and are described for alignment-related latch problems. A pocket door requires a frame and sliding track system, so compare the door and wall dimensions before selecting a kit.
Which measurements should you check?
- For strike plates, measure the existing plate, latch opening, and screw-hole spacing. Confirm the internal opening shape as well as the outside dimensions.
- For pocket door kits, check wall framing, door width, height, thickness, and weight against the product’s stated limits.
- Confirm whether the package includes the door panel. The EaseLife listing says the door is not included; the JUBEST details do not specify panel inclusion.
When does soft close or a shim matter?
A shim can help when a latch needs a small clearance adjustment, while included dowels can address screw holes that no longer hold securely. Soft-close mechanisms are a feature of both pocket door kits, but their weight capacities differ: JUBEST lists up to 220 pounds, and EaseLife lists up to 88 pounds. Choose according to the actual door panel and project requirements rather than assuming the kits are interchangeable.
Frequently Asked Questions
Can a strike plate fix a door that will not latch?
It may help when the problem comes from latch-to-frame alignment or clearance. Check the cause and compare the plate dimensions before replacing hardware.
What is the purpose of a strike plate shim?
A shim changes the spacing at the strike plate. The included shim is intended to help address clearance issues that keep a door from latching.
What door width does the JUBEST kit support?
The listed range is 24 to 36 inches. Its stated soft-close capacity is up to 220 pounds.
What is the maximum door weight for the EaseLife kit?
The EaseLife product details specify a maximum door weight of 88 pounds and a door width range of 24 to 30 inches.
Do the pocket door kits include a door panel?
The EaseLife listing states that the door is not included. The JUBEST product details provided do not specify whether a door panel is included, so confirm package contents before purchase.