Canadian Western red cedar cladding options include solid cedar boards, shingles, and cedar wall panels, but the products listed here suit different applications. The T&G panels are the closest match for board-style cladding; cedar shingles offer a different exterior texture. A waterproof composite option is included only as a non-cedar alternative. Compare the product format and stated coverage before choosing, and confirm installation details for your specific wall or roof project.
| Product | Best For | Stated Coverage or Size |
|---|---|---|
| T&G Western red cedar panels | Board-style cladding or decorative paneling | 21 sq. ft. per box |
| Western red cedar 18-inch shingles | Clean, refined shingle appearance | 18-inch shingles |
| Thick-butt tapersawn cedar shingles | Heavier shingle profile | About 18–20 sq. ft. per bundle for roof area |
| Western red cedar wall panels | Narrow natural-wood panels | 18 pieces, each 3.5 × 47.5 inches |
| WPC exterior wall slat panels | Waterproof composite alternative | 16.98 sq. ft. per pack |
T&G Western Red Cedar Cladding Panels
These tongue-and-groove Western red cedar boards are the closest listed match for someone seeking cedar cladding in a board-panel format. The product description states that each box covers 21 square feet and contains boards in assorted lengths from 12 to 55 inches. It describes the wood as Canadian-sourced, with a clear surface and visible texture.
Best for: Buyers planning a cedar panel feature or cladding layout that can use mixed board lengths. This product was selected because it is explicitly described as T&G cladding and provides a stated package coverage area.
Limitation: The listing describes use for interior decor and exterior ceiling decor. Confirm that its specifications and installation method suit your intended exterior wall application before ordering.
No. 1 Perfections Cedar Shingles
These 18-inch Western red cedar shingles are described as No. 1 Grade Certi-Label and selected for appearance. Listed features include minimal knots, smooth texture, and consistent dimensions. Compared with the tapersawn option below, this is the better fit for a buyer prioritizing a clean, relatively uniform shingle look over a thicker butt profile.
Best for: Cedar shingle projects where appearance consistency is a primary consideration. The stated grade and selection details make this a relevant option for buyers comparing cedar exterior finishes.
Limitation: The product information does not state package coverage or a recommended exposure. Check the seller’s current specifications and calculate project needs before purchase.
Thick-Butt Tapersawn Cedar Shingles
These 18-inch tapersawn Western red cedar shingles have a stated 5/8-inch butt edge. The listing positions the thicker edge as a heavier profile and gives approximate roof coverage of 18–20 square feet per bundle, or about five bundles per 100-square-foot square at a 7.5-inch exposure.
Best for: Buyers who want a more substantial shingle profile and need a stated roof-coverage estimate for planning. It was selected as a useful comparison with the No. 1 Perfections shingles.
Limitation: The coverage guidance is specifically given for roof area and standard exposure. Do not assume the same coverage applies to a wall; verify the proper wall installation details and exposure for your project.
Canadian Cedar Wall Panels
This package contains 18 Western red cedar boards, each listed as 0.3 inches thick, 3.5 inches wide, and 47.5 inches long. The description says the wood is sourced from Canadian forests and has a knot-free vertical-grain appearance. It is also described as natural wood without chemical treatment.
Best for: Buyers looking for narrow cedar boards for a paneling or accent-wall layout. The defined piece count and dimensions make it easier to compare with the assorted-length T&G package.
Limitation: The listing calls these wall panels but does not provide exterior-wall installation details or package coverage in square feet. Confirm intended exposure and installation suitability before using them as outdoor cladding.
Waterproof WPC Exterior Slat Panels
This product is a wood-plastic composite, not Western red cedar. The listing describes the panels as waterproof and UV-resistant, with a 3D wood-slat appearance. A three-panel pack is stated to cover 16.98 square feet.
Best for: Buyers comparing cedar with a composite option for a slatted exterior finish, especially when the listing’s stated waterproof and UV-resistant features are priorities. It was selected as a clearly labeled alternative rather than a cedar substitute.
Limitation: Choose this only if composite material meets your needs. It is not solid cedar and will not provide the same wood material as the cedar products above.
Buying Guide
Are you looking for boards or shingles?
Choose T&G boards or wall panels for a board-style layout. Choose shingles for a layered shingle appearance. These are different cladding formats, so compare the visual result and installation requirements rather than treating their stated dimensions as interchangeable.
How much coverage should you plan for?
Start with the surface area you need to cover, then compare it with the stated package coverage. The T&G listing gives 21 square feet per box, and the WPC pack gives 16.98 square feet. The tapersawn shingle listing gives a roof-area estimate only. Ask the seller for missing coverage information and allow for cuts and layout needs when calculating quantities.
What should you verify before installing cedar outdoors?
Confirm that the product is intended for your specific application, whether that is an exterior wall, ceiling, or roof. Check the manufacturer’s installation directions for exposure, fastening, substrate, and finishing recommendations. The provided product details do not answer all of these questions, particularly for the wall-panel listings.
How should appearance and material influence your choice?
For a more uniform shingle appearance, compare the No. 1 Perfections product’s stated minimal knots and consistent dimensions. For a heavier shingle edge, consider the 5/8-inch-butt tapersawn option. For natural cedar boards, compare the T&G package with the narrower 18-piece panels. Consider the WPC option only if composite is acceptable.
Frequently Asked Questions
Is Western red cedar cladding the same as cedar shingles?
No. Cedar cladding can refer to several exterior formats, including boards and shingles. These products have different shapes, coverage information, and installation requirements.
Which listed product is closest to board-style cedar cladding?
The T&G Western red cedar panels are the closest match because the listing explicitly describes them as tongue-and-groove cladding panels.
Do the shingle coverage figures apply to walls?
Not necessarily. The tapersawn product’s stated bundle coverage is for roof area at a specified exposure. Confirm wall coverage and installation requirements separately.
Are the WPC panels made from cedar?
No. The WPC panels are described as wood-plastic composite. They are a composite alternative, not solid Western red cedar.
What information should I check if a product lacks coverage details?
Ask for coverage per box or bundle, recommended exposure, and application-specific installation directions before estimating the quantity needed.