The best 70-inch shower door is an adjustable sliding model whose specified opening range includes the measured width of your shower. For openings around 70 inches, the GETPRO 68–72-inch doors and the TUKTUK 68–72-inch model are direct fits; choose between double sliding and single sliding designs, finish, and height. The LMLMD model fits openings from 67 to 72 inches. The Royal Guard is included as a comparison, but its 56–60-inch range is too narrow for a 70-inch opening.
| Product | Opening range | Height | Best for |
|---|---|---|---|
| GETPRO Matte Black | 68–72 inches | 72 inches | Black finish and double sliding panels |
| TUKTUK Frameless | 68–72 inches | 76 inches | Taller single sliding door |
| LMLMD Brushed Nickel | 67–72 inches | 72 inches | Double sliding with anti-jump design |
| GETPRO Chrome | 68–72 inches | 72 inches | Chrome finish and bypass access |
| Royal Guard Matte Black | 56–60 inches | 70 inches | Narrower shower openings, not 70 inches |
GETPRO Matte Black Double Sliding Shower Door
This semi-frameless bypass door is designed for finished openings from 68 to 72 inches wide and measures 72 inches high. Its 1/4-inch clear tempered glass and double sliding panels make it a direct option for many showers measuring about 70 inches across. The reversible design supports left- or right-wall installation.
Best for: Buyers who want a matte black finish, adjustable width, and two sliding panels. The aluminum frame and reinforced dual-curved top track are listed features intended to support the door structure.
Keep in mind: The rail must be trimmed to adjust the width, so confirm the measurement and installation requirements before cutting. The 72-inch height may not suit a shower that needs a taller enclosure.
TUKTUK Frameless Single Sliding Shower Door
The TUKTUK door fits openings from 68 to 72 inches wide and is 76 inches high. It uses a single sliding-panel design and 1/4-inch tempered glass. The product listing identifies the glass as ANSI- and SGCC-certified and says it has bonded safety film to help reduce fragment scatter if the glass breaks.
Best for: Buyers whose opening is about 70 inches and who prefer a taller, frameless-style door. Its stated easy-clean coating is designed to resist limescale and soap-scum buildup.
Keep in mind: This model has a single sliding panel rather than the double-sliding bypass arrangement of the GETPRO options. Check the installation layout to make sure that configuration suits your shower.
LMLMD Brushed Nickel Double Sliding Door
This double-sliding frameless model is specified for openings from 67 to 72 inches and has a 72-inch height. Its listed walk-in opening is 30 to 35 inches. Features include 1/4-inch tempered glass, an easy-clean nano-coating, an anti-jump design, and thickened aluminum rails.
Best for: Buyers with a measured opening near 70 inches who want brushed nickel and a wider stated walk-in opening. The listing also says the design supports left- or right-side installation.
Keep in mind: Its brushed nickel finish differs from the black and chrome options. Confirm the finished opening falls within the 67–72-inch range and compare the stated walk-in clearance with your needs.
GETPRO Chrome Double Sliding Shower Door
This GETPRO model shares the 68–72-inch adjustable width and 72-inch height of the matte black version, with a chrome finish. It has 1/4-inch clear tempered glass, a reversible design, and two sliding panels. The manufacturer describes its aluminum frame and dual-curved top track as durable structural features.
Best for: Buyers with an opening near 70 inches who want a chrome appearance and bypass-style access. Its reversible layout can accommodate either left- or right-wall installation, according to the product details.
Keep in mind: Width adjustment requires trimming the rail. This door is 72 inches high, so compare that measurement with the shower walls and installation area before choosing it.
Royal Guard Matte Black Sliding Shower Door
This double-sliding door adjusts from 56 to 60 inches wide and stands 70 inches high. Its listed features include 1/4-inch ANSI-certified clear tempered glass with explosion-proof film, an aluminum frame, 304 stainless steel hardware, and two towel bars on a stationary panel. The door is reversible for left- or right-side sliding.
Best for: Buyers with a narrower shower opening who want towel bars and a matte black finish. The stated walk-in width is 24 1/8 to 28 1/8 inches.
Important limitation: This model does not fit a 70-inch opening; its maximum stated width is 60 inches. Choose it only if your measured opening falls within its specified range.
Buying Guide: How to Choose a 70-Inch Shower Door
What opening range should I look for?
Measure the finished shower opening at the top, middle, and bottom, following the product’s installation instructions. Compare the smallest or otherwise required measurement with the manufacturer’s stated adjustment range. A nominal 70-inch opening falls within the 67–72-inch and 68–72-inch options here, but not the Royal Guard’s 56–60-inch range. Do not assume that a door labeled “72 inches” fits every opening up to that width.
Should I choose single or double sliding panels?
Double sliding bypass doors let either glass panel move and can provide flexible access from both sides. A single sliding model has a different opening arrangement, so consider where you need to enter the shower and how the panels will move in your bathroom. Compare the listed walk-in clearance when that measurement is provided.
How do finish and height affect the choice?
Choose a finish that works with the bathroom’s existing hardware: the listed options include matte black, chrome, and brushed nickel. Check door height separately from width. The products here range from 70 to 76 inches tall, and a model that fits the opening width may still be too short or tall for the installation area.
What glass and maintenance details matter?
These products list 1/4-inch tempered glass. Some listings also describe safety film or an easy-clean coating; those features vary by model, so verify the specific product details rather than assuming every door includes them. Coatings may help reduce buildup, but the available information does not specify cleaning products or maintenance schedules.
Frequently Asked Questions
Will a 68–72-inch shower door fit a 70-inch opening?
Its stated width range includes 70 inches. Measure the finished opening and confirm the installation instructions before purchasing or trimming any rail.
Which listed door is tallest?
The TUKTUK model is 76 inches high. The GETPRO and LMLMD models are 72 inches high, while the Royal Guard is 70 inches high.
Which option has the widest stated walk-in opening?
The LMLMD listing states a walk-in opening of 30 to 35 inches. The Royal Guard lists 24 1/8 to 28 1/8 inches; walk-in width is not provided for the other models in the supplied details.
Can I use the Royal Guard door for a 70-inch opening?
No. Its adjustable width is 56 to 60 inches, which is narrower than a 70-inch opening.
Do all five doors have the same finish?
No. The list includes matte black, chrome, and brushed nickel finishes. Select the finish that matches your bathroom and confirm the exact finish in the product listing.