If you need a true 5-foot-high by 10-foot-wide chain link gate, none of the listed products is specified for a 10-foot opening. The gate kits below are narrower walk-through options, generally adjustable to 72 inches. Fit-Right is best for an anti-sag kit with included mesh and hardware; Kicari and 797Audio offer adjustable metal gate components; HITTITE is a 4-foot-high alternative. The OKG chain is a security accessory, not a gate.
| Product | Listed size or range | Best suited for |
|---|---|---|
| Fit-Right Adjustable Gate Kit | Up to 72 inches wide, 5 feet high | Anti-sag walk-through gate |
| Kicari Chain Link Gate | 26–72 inches wide, 5 feet high | Adjustable garden entry |
| 797Audio Chain Link Gate Kit | 26–72 inches wide, 5 feet high | Cut-to-fit opening |
| HITTITE Gate Kit | 26–72 inches wide, 4 feet high | Shorter pedestrian gate |
| OKG Security Chain | 3.9 feet long | Supplemental gate locking |
Fit-Right Adjustable Chain Link Gate Kit
Best for: A 5-foot-high walk-through gate no wider than 72 inches, especially when reducing sag is a priority. The kit uses a patented truss cable system intended to help prevent sagging or dragging. It can be installed on-site to fit the opening.
The listed package includes a steel gate frame, galvanized chain link, a lockable latch, gate hinges, and steel wire ties. That makes it a more complete option for building or replacing a narrow gate than a frame-only kit.
Limitation: It is not specified for a 10-foot-wide opening. Posts and post hinges are not included, so check what existing fence hardware can be reused.
Kicari Adjustable 5-Foot Chain Link Gate
Best for: A yard or garden opening that is between 26 and 72 inches wide and needs a 5-foot-high gate. The listing describes galvanized steel construction and an adjustable design. Its horizontal poles can be cut to the required width, making it suited to openings within the stated range.
The package lists two vertical poles, two horizontal poles, a chain link roll, two tension bars, eight gate clips, ten metal ties, and an installation manual. This component list helps buyers check whether the kit supplies the basic gate-building materials they need.
Limitation: The maximum listed width is 72 inches, well short of a 10-foot span. Cutting the horizontal poles is part of fitting the gate, so measure carefully before modifying them.
797Audio Cut-To-Fit Chain Link Gate Kit
Best for: Buyers fitting a residential or farm walk-through opening from 26 to 72 inches wide. The listing specifies a 5-foot height, galvanized metal construction, and a 2-by-2-inch mesh size. It also describes 3 mm galvanized wire and an adjustable width that can be cut to size.
The product is presented as an outdoor gate with weather and corrosion resistance, and the listing mentions use around a yard and for access by pets. Those details make it a relevant option when a standard narrow pedestrian gate is needed.
Limitation: The listed adjustable range does not accommodate a 10-foot-wide gate. The provided features do not specify a complete hardware inventory, so confirm what else is needed for installation.
HITTITE Four-Foot Adjustable Gate Kit
Best for: Buyers seeking a shorter pedestrian gate for a residential yard, entryway, or garden. The product name specifies an adjustable width of 26 to 72 inches and a 4-foot height, so it may suit an opening where a five-foot gate is not required.
Limitation: It is one foot shorter than the 5-foot-high options and does not reach a 10-foot width. The available product details do not provide a parts list, so verify included components before planning installation.
OKG Hardened Security Chain
Best for: Adding a chain-based locking accessory to an existing gate setup. The listing describes a 3.9-foot-long, 5/16-inch-thick outdoor chain made of hardened alloy steel, intended for gates and other equipment.
This is not a chain link gate or a gate frame. Consider it only as a separate security accessory, and check whether its length and the rest of your locking hardware suit the gate.
Limitation: It does not provide a gate panel, hinges, latch, or a 10-foot opening solution.
Buying Guide: How To Choose A 5×10 Chain Link Gate
Does 5×10 mean five feet high by ten feet wide?
Usually, the dimensions describe height first and width second, but confirm the convention with the seller or installer. A 10-foot opening is 120 inches wide. Every gate kit listed here tops out at 72 inches, so none is a direct match for that span.
What should you buy for a 10-foot opening?
Look for a gate specifically rated for a 120-inch opening, or ask a fence professional about a custom double-swing gate made of two leaves. Do not assume that two smaller gate kits can be combined safely; posts, hinges, latches, and support requirements need to suit the complete installation.
Which listed kit is better for a standard walk-through?
Choose Fit-Right if its included mesh and listed truss cable system match your needs, and note that posts and post hinges are excluded. Compare the Kicari and 797Audio options by their width range, height, mesh details, and parts information. HITTITE is the shorter choice at four feet high.
What measurements should you take first?
Measure the clear opening between the gate posts at the top, middle, and bottom. Check the available swing space and note the desired gate height. Confirm whether the quoted width refers to the gate itself or the opening it fits, and verify hardware and post requirements before ordering.
Frequently Asked Questions
Is any listed product a true 5-foot-by-10-foot gate?
No. The gate kits listed are no wider than 72 inches. A 10-foot-wide gate needs a product explicitly designed for a 120-inch opening.
Can an adjustable 72-inch gate be stretched to 10 feet?
The listings do not support that use. Their stated maximum width is six feet, and extending the frames beyond their specified range is not established as safe or suitable.
Which listed gate is five feet tall?
Fit-Right, Kicari, and 797Audio describe 5-foot-high gate options. HITTITE is listed as 4 feet high.
Does the Fit-Right kit include posts?
No. Its listed package includes gate components and hardware, but posts and post hinges are specifically excluded.