A 5-inch stove pipe kit usually needs straight pipe and may also require an elbow or reducer to match the appliance and vent layout. Among these options, the Imperial 24-gauge pipe is best for a sturdy straight connection, the LEIFIDE pipe is best for buyers seeking stainless steel, and the Imperial elbow is for layouts that need a 90-degree turn. The Moxweyeni reducer is intended for a 6-to-5-inch transition. Confirm that every component matches the stove manufacturer’s venting requirements before buying.
Imperial 24-Gauge Black Stove Pipe
This 5-inch-diameter, 24-inch-long pipe is made from 24-gauge single-wall steel. One end is crimped to fit into pipes or fittings of the same diameter. The listed purpose is connecting a wood stove to a chimney entrance.
Best for: Buyers who need a straight pipe section and prioritize the listed heavy-duty steel construction. It is a practical kit component when the length and connection style suit the vent layout.
Limitation: This is one straight pipe section, not a complete kit. Check whether the installation requires additional lengths or fittings.
LEIFIDE 304 Stainless Steel Stove Pipe
LEIFIDE lists this pipe as 5 inches in diameter and 24 inches long, with 0.5-millimeter-thick 304 stainless steel. It has a crimped end designed to connect with tubes or fittings of the same diameter. The product description also identifies it as a flue chimney stovepipe connector.
Best for: Buyers looking specifically for a stainless steel straight section with a crimped connection. Its stated dimensions make it straightforward to compare with other 5-inch, 24-inch pipe options.
Limitation: The listing describes one pipe, not a full kit. Verify that the material and pipe type are allowed for the intended stove and installation.
States HDW 5-Inch Furnace Pipe
This States HDW product is listed as a 5-inch-by-24-inch, 30-gauge furnace pipe. The supplied details also describe it as highly durable and provide package dimensions of 5 by 5 by 24 inches.
Best for: Buyers comparing basic 5-inch, 24-inch pipe sections who have confirmed that this furnace pipe is appropriate for their particular venting application.
Limitation: The product details do not specify a crimped end, material, or wood-stove use. Do not assume that it is interchangeable with a stove pipe section based on diameter and length alone.
Imperial 5-Inch Adjustable 90-Degree Elbow
This Imperial component is described as a 5-inch-diameter, adjustable 90-degree steel stove pipe elbow. Unlike the straight pipe options, it is intended for a vent layout that needs a turn.
Best for: Buyers whose approved pipe route requires an elbow rather than only straight sections. Its listed 5-inch diameter makes it relevant when assembling a system with matching 5-inch components.
Limitation: The supplied product information does not state its adjustment range or connection details. Confirm those specifications before planning the layout.
Moxweyeni 6-To-5-Inch Pipe Reducer
This black matte adapter is designed to connect a 6-inch duct to 5-inch ducting. The product details say the 5-inch collar is crimped and the 6-inch collar is not crimped. It is a size-transition fitting, not a straight pipe section.
Best for: Buyers who need to adapt a 6-inch section to 5-inch piping and have verified that this transition is suitable for their stove and vent system.
Limitation: A reducer changes pipe diameter and should not be used to override the stove manufacturer’s specified vent size. Confirm the fitting orientation and permitted use before installation.
Buying Guide: How to Choose 5-Inch Stove Pipe Components
Does a stove pipe kit include everything needed?
Not necessarily. These listings include individual components, including straight pipe, an elbow, and a reducer. Determine the required parts from the appliance instructions and the planned route. Measure the needed straight-run lengths and identify any turns or size transitions before ordering.
Should you choose steel or stainless steel?
Compare the stated material and gauge rather than relying on appearance alone. The Imperial straight pipe is listed as 24-gauge single-wall steel, while the LEIFIDE pipe is listed as 304 stainless steel at 0.5 millimeters thick. The States HDW pipe is listed as 30 gauge, but its details do not specify material. Confirm that the selected product is appropriate for the intended installation.
When is an elbow or reducer needed?
An elbow is for a route that needs a turn; a reducer connects different pipe diameters. Neither replaces straight pipe. Match the diameter, end style, and direction of connection to adjoining components. Do not assume parts from different listings will fit together just because they are described as 5 inches.
What should you verify before purchase?
- Check the stove manual for the required vent diameter and permitted pipe type.
- Confirm pipe length, gauge or material, and whether each end is crimped.
- Check local building and fire-safety requirements for clearances and installation.
- Ask a qualified installer or local authority if the proposed configuration is unclear.
Frequently Asked Questions
Can a 5-inch pipe fit any wood stove?
No. Use the vent diameter and pipe type specified by the stove manufacturer. A matching diameter alone does not establish compatibility.
Is a 24-inch pipe the same as a complete kit?
No. The listed 24-inch products are individual pipe sections. An installation may require additional pipe or fittings, depending on the approved layout.
What is the difference between a stove pipe elbow and reducer?
An elbow changes direction, while a reducer changes diameter. They serve different purposes and are not interchangeable.
Can a 6-to-5-inch reducer be used to fit a smaller stove connection?
Only if the stove manufacturer and applicable installation requirements permit that size transition. Confirm before purchasing or installing it.
| Product | Best For | Key Detail |
|---|---|---|
| Imperial 24-gauge pipe | Sturdy straight runs | Single-wall steel, crimped end |
| LEIFIDE stainless pipe | Stainless steel option | 304 stainless steel, 24 inches long |
| States HDW furnace pipe | Basic 5-by-24-inch pipe | 30-gauge construction listed |
| Imperial 90-degree elbow | Turning a pipe run | 5-inch steel elbow |
| Moxweyeni reducer | 6-to-5-inch transition | Different crimp details at each end |