A true 2HP deep-well jet pump is not clearly represented in this product list, so check horsepower and well-depth specifications before choosing. The Sta-Rite is explicitly identified as a deep-well jet pump, while the WAYNE and Acquaer are convertible models for deeper wells. The AQUASTRONG is the listed 2HP option, but its description identifies it as a shallow-well irrigation pump. These distinctions matter when matching a pump to your well.
| Product | Best suited for | Key specification |
|---|---|---|
| Sta-Rite MSF | Deep-well applications | 1.5 HP; vertical multi-stage |
| WAYNE CWS100 | Convertible well setups | 1 HP; 25–90 ft wells |
| Acquaer Convertible | Single- or two-pipe wells | 1 HP; up to 90 ft |
| AQUASTRONG | High-volume irrigation | 2 HP; shallow-well pump |
| VEVOR Portable Pump | Shallow suction and water transfer | 1.5 HP; max suction 26.2 ft |
Sta-Rite MSF Vertical Deep Well Jet Pump
Best for: Buyers seeking a pump specifically described as a deep-well jet model. The product name identifies it as a vertical, multi-stage deep-well jet pump with 1.5 horsepower and a 115–220V designation. It is the closest match here to the deep-well part of the search, but it is not listed as a 2HP pump.
Why it was selected: Unlike the shallow-well irrigation options, its product name explicitly specifies deep-well use. The provided listing information does not include a maximum well depth, flow rate, pressure details, or installation components. Confirm those requirements with the manufacturer or seller before purchase; the available specifications are too limited to establish suitability for a particular well.
WAYNE CWS100 Convertible Jet Pump
Best for: Buyers with a convertible well setup and a well depth listed between 25 and 90 feet. This 1HP cast-iron pump has a dual-voltage motor, factory-set to 115V, and a pressure switch preset to 30–50 PSI. The listing reports a maximum flow of 588 gallons per hour.
Why it was selected: Its stated depth range makes it more relevant to deep-well shopping than a shallow-only pump. Choose it if its 1HP rating and well-depth range fit your system. The jet assembly is required and sold separately, so account for that component when planning an installation.
Acquaer Convertible Shallow/Deep Well Pump
Best for: Buyers who need one pump design for either a single-pipe shallow well or a two-pipe deeper-well setup. The listing specifies 1HP, dual voltage at 115V or 230V, and use with wells up to 25 feet for single-pipe setups or 90 feet for two-pipe setups. It includes venturis and an ejector kit, and has automatic thermal overload protection.
Why it was selected: Its stated two-pipe depth range makes it a relevant convertible option. It is not a 2HP model, and the listing says it is factory-set for 230V; verify voltage and wiring needs before installation.
AQUASTRONG 2HP Shallow Well Jet Pump
Best for: Buyers who prioritize a 2HP motor and high-volume irrigation rather than a confirmed deep-well setup. The pump is listed at 230V, with maximum flow of 5,200 gallons per hour, maximum head of 108 feet, a 2-inch NPT suction, and a 1.5-inch NPT discharge. Its reinforced impeller and diffuser are described as supporting water flow.
Why it was selected: It is the only product in this selection explicitly listed as 2HP. However, the product description calls it a shallow-well jet/centrifugal pump, so do not assume it can lift water from a deep well. Its 230V-only specification also makes it a poor fit where that supply is unavailable.
VEVOR 1.5HP Portable Shallow Well Pump
Best for: Shallow water transfer, garden irrigation, or sprinkler boosting—not a deep-well installation. The listing specifies 1.5HP, 115V, up to 1,200 gallons per hour, maximum suction of 26.2 feet, and maximum head of 164 feet. It has a stainless-steel pump head, cast-aluminum housing, and 1-inch NPT inlet and outlet.
Why it was selected: It offers a clearly stated suction limit and portable shallow-well design for comparison. The pump head must be filled with water before use. Its listed 26.2-foot maximum suction makes it unsuitable for wells deeper than that stated limit.
Buying Guide: How to Choose a Deep-Well Jet Pump
Does the pump match your well depth?
Start with the vertical distance from the pump to the water level, not just the total depth of the well. Compare that measurement with the pump’s stated suction or well-depth range. A product labeled “deep well” or “convertible” may require a specific two-pipe arrangement and a compatible jet or ejector. Confirm the required setup before buying.
Is horsepower the most important specification?
Horsepower alone does not confirm that a pump can serve a particular well. Check well type, maximum lift or depth, flow rate, pressure requirements, voltage, and connection sizes. In this selection, the 2HP model is described as shallow-well equipment, while the explicitly named deep-well option is 1.5HP.
What electrical and installation details should you check?
Verify whether the motor is single- or dual-voltage and whether it is factory-set to a particular voltage. Check the pump’s required piping, jet or ejector components, and priming instructions. For example, the WAYNE listing says its jet assembly is sold separately, while the VEVOR instructions specify filling the pump head with water before use.
Frequently Asked Questions
Is the AQUASTRONG 2HP pump a deep-well pump?
The provided description identifies it as a shallow-well jet/centrifugal pump. Its 2HP rating does not establish that it can draw water from a deep well.
Which listed product is specifically described as a deep-well jet pump?
The Sta-Rite MSF is identified as a vertical multi-stage deep-well jet pump. Its listed horsepower is 1.5HP, not 2HP.
Can a convertible jet pump work with a deep well?
It can be suitable for some deeper wells when configured for the required two-pipe system and used within its stated depth range. Check the specific model’s installation requirements and included components.
Does maximum head equal maximum well depth?
No. Maximum head and maximum suction or well-depth ratings are different specifications. Use the manufacturer’s stated well-depth or suction limit when assessing whether a pump can lift water from your well.
What should I do if I need a 2HP deep-well pump?
Look for a model whose manufacturer explicitly lists both 2HP and suitability for your well depth and piping arrangement. The product descriptions reviewed here do not confirm a model that meets both requirements.