Timber sliding stacker doors need hardware sized for the door panels, opening, and installation layout. The products below are hardware kits rather than complete timber door sets, and most are described for a single door; the JUBEST kit is specifically listed for two doors. Choose the JUBEST kit for a two-door layout, the concealed kit for a low-visibility interior installation, or a single-door track kit for a basic sliding door. Confirm panel count, door weight, track length, and mounting requirements before buying.
| Product | Best suited for | Key detail |
|---|---|---|
| JUBEST 14FT Box Rail Kit | Two-door systems | 14-foot track; doors not included |
| WINOVERCO Concealed Kit | Interior openings | Soft close; specified opening width |
| TSMST 6FT Kit | Single wood doors | Stainless steel, Y-style hardware |
| 6FT Low-Clearance Kit | Limited overhead clearance | Aluminum alloy box rail |
| Cabinet Pocket Door Slides | Inset cabinet doors | Concealed cabinet hardware |
JUBEST 14FT Box Rail Kit For Two Doors
Best for: Buyers planning a two-door sliding arrangement who need a longer track. The listing describes a 14-foot box rail exterior barn door hardware kit, wall mounting, and a two-door system. It is the clearest match in this group for a multi-panel configuration, so it is the first option to investigate for a timber stacker-style setup.
Limitation: Doors are not included, and the listing does not establish compatibility with every stacker-door configuration. Check the required panel arrangement, total weight, and installation details before ordering.
WINOVERCO Concealed Soft-Close Kit
Best for: An interior single-door opening where a hidden wall-mounted system and soft-close mechanism are priorities. The kit is listed for openings 25 to 29 inches wide, supports up to 176 pounds, and does not require a floor track. These stated limits make it easier to compare against a measured opening and door weight.
Limitation: This is a 36-inch kit identified for one door, not a multi-panel stacker system. Avoid it if your opening or door weight falls outside the listed specifications.
TSMST 6FT Stainless Steel Track Kit
Best for: A single timber door needing a six-foot track with stainless steel hardware. The listing describes a heavy-duty track and Y-style design, making this a straightforward option to compare for a conventional single-door installation.
Limitation: The product is specified for one wood door, and the supplied details do not give a maximum door weight. Confirm load limits and whether the track arrangement suits your planned panels before using it for a stacker layout.
6FT Low-Clearance Aluminum Box Rail Kit
Best for: A single interior wooden door in a space where overhead clearance is a concern. This kit is described as a six-foot, low-clearance aluminum alloy box rail system for one door. Its format may suit buyers who want a boxed track profile rather than exposed conventional hardware.
Limitation: The listing does not provide a stated door-weight capacity or indicate that the system supports multiple stacked panels. Verify both details for a heavier timber door or multi-panel project.
Cabinet Pocket Door Slides For Inset Doors
Best for: Cabinet projects using inset doors that slide out of view. The product is described as hidden sliding hardware for cabinet pocket doors, which makes it relevant to small-scale timber cabinetry rather than full-size room dividers.
Limitation: This is cabinet hardware, not a full-size door track kit. Do not select it for room-height stacker doors unless the manufacturer confirms that the dimensions and load capacity meet the project requirements.
Buying Guide: How To Choose Timber Stacker Door Hardware
How many panels must the track carry?
Count the panels that move and determine whether they travel on one track or multiple tracks. A standard single-door barn track is not automatically suitable for doors that stack together. Of these options, the JUBEST listing explicitly identifies a two-door system; confirm that its configuration matches your intended stacker layout.
What track length and opening width do you need?
Measure the opening and the space beside it where the panels will park. Track length affects how far a door can travel, while opening width determines the required panel coverage. The listed kits range from a 36-inch concealed system with a specified opening width to six-foot and 14-foot tracks.
How should you compare capacity and mounting?
Check the actual timber door weight against the hardware’s stated capacity. Only the concealed kit in this selection gives a maximum capacity: 176 pounds. Also confirm the wall structure and mounting method, whether a floor guide is needed, and whether the hardware is intended for interior or exterior use.
Is concealed or exposed hardware better?
Concealed hardware can create a less visible look, while exposed box rail or barn-door hardware leaves the track more apparent. Consider clearance, appearance, access for installation, and maintenance. Do not assume a hidden kit supports several panels simply because it conceals the mechanism.
Frequently Asked Questions
Are these products complete timber sliding doors?
No. These listings are hardware products. The JUBEST listing explicitly says doors are not included, and the other products are also described as tracks or sliding hardware.
Which listed option is most relevant to a two-door system?
The JUBEST 14-foot box rail kit is described for a two-door system. Confirm the track layout and stacker compatibility with the seller before purchase.
Can a single-door barn track be used for stacker doors?
Not necessarily. A single-door kit may lack the tracks or components required to move multiple panels. Verify panel count, configuration, and weight limits for the exact system.
What is the difference between a pocket-door kit and barn-door hardware?
Pocket-door hardware is intended to conceal a door inside a wall or cabinet space. Barn-door hardware typically carries a door along an exposed or wall-mounted track.
What measurements should I take before ordering?
Measure the opening width, available track and parking space, door height and thickness, and the weight of each panel. Compare those measurements with the hardware specifications.