The best sliding TV wall mount depends on your screen size, wall construction, and how far you need to reposition the TV. The Perlegear mount suits buyers who want broad TV and stud compatibility, while the USX MOUNT is a strong match for large screens and an 8-inch adjustment range. The USX STAR offers similar sliding and viewing adjustments; another Perlegear model prioritizes a slim profile. MORryde is designed for lighter TVs and a longer horizontal extension.
| Mount | Best for | Key listed detail |
|---|---|---|
| Perlegear 42–95-Inch | Broad installation options | Up to 150 lb; 12-, 16-, and 24-inch studs |
| USX MOUNT | Large TVs and repositioning | Up to 8-inch slide; up to 150 lb |
| USX STAR | Adjustable viewing angle | 8-inch slide and leveling adjustment |
| Perlegear Ultra Slim | Low-profile installation | 1.1-inch wall clearance |
| MORryde TV40-002H | Long horizontal extension | 36-inch extension; 45 lb capacity |
Perlegear Full Motion Sliding TV Mount
This mount is best for buyers who need a heavy-duty bracket with options for different TV sizes and wall layouts. It supports most flat or curved TVs from 42 to 95 inches, with VESA patterns from 200 x 100 mm to 600 x 400 mm. Its wall plate can be installed on 12-, 16-, or 24-inch wood studs, or on concrete and brick.
The horizontal adjustment helps center a TV even when the studs do not line up with the desired screen position. The listed capacity is up to 150 pounds, and the product information describes a heavy-duty steel construction and load and cycle testing. Choose this model if stud spacing flexibility matters. Avoid it if the only mounting surface is drywall: the manufacturer says not to install it on drywall alone.
USX MOUNT 8-Inch Sliding Full Motion Mount
This USX MOUNT is best for large TVs and rooms where the screen needs to shift after the wall plate is installed. It is listed for 42- to 97-inch TVs weighing up to 150 pounds, and the sliding design allows up to 8 inches of left-right movement. Its dual articulating arms extend the TV up to 19 inches and retract it to 3.35 inches from the wall.
For angle adjustments, the mount swivels up to 45 degrees in either direction and tilts from 5 degrees upward to 15 degrees downward. Tool-free tilt is a useful distinction for buyers who want to adjust the screen without using tools. It supports several wood-stud spacings, as well as concrete or brick. Do not choose it for a drywall-only installation.
USX STAR Sliding TV Wall Mount
This mount is best for buyers who want horizontal repositioning plus several ways to fine-tune the viewing angle. It fits most listed 42- to 97-inch TVs and has a maximum weight capacity of 150 pounds. Its sliding design shifts the screen up to 8 inches left or right, while the level adjustment allows up to 3 degrees of correction after installation.
The mount also tilts from 5 degrees upward to 15 degrees downward and swivels up to 45 degrees in either direction. The listed VESA patterns range from 200 x 100 mm to 600 x 400 mm, and supported surfaces include wood studs, concrete, and brick. Check the TV’s VESA pattern and weight before choosing it. The listing says it should not be mounted directly on drywall without wood studs.
Perlegear Ultra Slim Full Motion Mount
This Perlegear model is best for buyers who want a low-profile look without giving up full-motion adjustments. It supports most 42- to 90-inch TVs weighing up to 132 pounds, with VESA patterns from 200 x 200 mm to 600 x 400 mm. The mount holds the TV 1.1 inches from the wall when retracted, making it a better fit for buyers prioritizing a close-to-wall appearance.
When viewing angles need adjustment, the bracket extends up to 15 inches, swivels up to 45 degrees in either direction, and tilts 5 degrees up or 15 degrees down. Its extendable wall plate accommodates 16- to 24-inch wood-stud spacing. This is not the best choice if you need the listed 12-inch stud option or a capacity above 132 pounds. It should not be installed on drywall alone.
MORryde TV40-002H Horizontal Sliding Mount
The MORryde TV40-002H is best for buyers who need a longer horizontal extension rather than the higher weight capacity of the other featured mounts. Its listed extension is 36 inches, with 120 degrees of pivot, and its maximum capacity is 45 pounds. The package includes the TV mount, TV mounting hardware, installation hardware, and installation instructions.
Choose this model only if the TV’s weight is within the stated limit and its installation requirements suit the intended setup. The supplied product details do not specify a TV-size range, VESA range, or wall-surface compatibility, so verify those requirements before buying. Its 45-pound capacity makes it a poor match for heavier TVs.
Buying Guide: How To Choose A Sliding TV Mount
How much horizontal movement do you need?
Sliding mounts can help center a TV when wall studs are not aligned with the ideal screen position. The USX MOUNT and USX STAR listings specify up to 8 inches of left-right movement. The first Perlegear model also describes horizontal centering, but does not state a specific shift distance in the supplied details. MORryde lists a 36-inch extension; confirm that this movement type matches your intended setup.
Will the mount fit your TV and wall?
Compare the TV’s weight and VESA pattern with the mount specifications, and check the supported screen-size range. Confirm the stud spacing or other wall type is appropriate before installation. Several featured products explicitly support concrete or brick as well as wood studs, but the listings warn against mounting directly to drywall alone. Follow the product’s installation instructions.
Do you need a low profile or more movement?
A fixed-looking, close-to-wall position favors the Perlegear Ultra Slim, which lists 1.1 inches of clearance when retracted. A longer reach and more angle options may be more useful when seating is spread across a room. Compare extension, swivel, and tilt specifications rather than assuming every sliding mount moves or adjusts in the same way.
Frequently Asked Questions
What is a sliding TV wall mount?
It is a TV bracket that allows horizontal repositioning, usually to help center a screen or adjust its placement after installation. The amount and direction of movement vary by model.
Can I install a sliding TV mount on drywall alone?
The featured Perlegear and USX listings say not to install their mounts on drywall alone. Check the instructions for the specific mount and use an approved wall structure and installation method.
How do I know whether a mount fits my TV?
Check the TV’s screen-size range, weight, and VESA mounting pattern against the mount’s listed limits. All three must meet the product requirements.
Is a larger weight capacity always better?
Capacity is a limit, not a substitute for fit checks. The TV must also match the mount’s VESA pattern and size range, and the wall installation must follow the mount’s requirements.
What is the difference between sliding and swiveling?
Sliding moves the TV horizontally along its mounting arrangement. Swiveling pivots the screen to face a different direction. A full-motion mount may offer both, but the range depends on the model.