The EAGLE 1 five-foot copper drip edge is the closest match for buyers who need a preformed roof edge: it is listed as 16-ounce pure copper and has a 75-degree angle. For custom flashing, GOORY offers copper rolls in two lengths, while Grip-Rite supplies a laminated copper shield. The brown EAGLE 1 option is a formed drip edge alternative, but its listed finish is brown rather than copper. Check the product’s exact material and dimensions against your roof before ordering.
| Product | Best For | Format |
|---|---|---|
| EAGLE 1 Copper | Preformed roof-edge installation | 5-foot drip edge sections |
| Grip-Rite Copper Shield | Flexible flashing applications | 8-inch by 20-foot laminated shield |
| GOORY 6-Inch by 10-Foot | Shorter custom flashing runs | Copper roll |
| GOORY 6-Inch by 20-Foot | Longer custom flashing runs | Copper roll |
| EAGLE 1 Brown | Formed drip edge without a copper finish | 5-foot drip edge sections |
EAGLE 1 Five-Foot Copper Drip Edge
Best for: Roofers and homeowners who want a preformed copper edge rather than a flat flashing roll. This product is listed as 16-ounce pure copper, with five-foot sections, a 4-inch leg, a 1.5-inch hemmed fascia edge, and a 75-degree angle. The listing says it can be used on metal or shingle roofs and includes matching screws, a hex bit driver, and gloves.
Choose this if you need a drip-edge profile that is ready to install and its dimensions suit your roof assembly. The included fasteners and driver may simplify installation. Limitation: Each section is five feet long, so plan for joints and layout across the roof edge. Confirm the angle and leg dimensions before purchase.
Grip-Rite Laminated Copper Shield
Best for: Buyers seeking a long, narrow copper flashing shield for a specific roof or building detail. The product is described as a 3-ounce, 8-inch-by-20-foot laminated copper shield and is identified as suitable for ACQ pressure-treated wood.
Its roll-like format gives more continuous length than the five-foot preformed EAGLE 1 sections. It may suit work where a flexible shield is needed, rather than a factory-shaped drip edge. Limitation: The listing does not describe a formed drip-edge angle or hemmed fascia edge. Check whether the shield’s profile and width meet the intended installation requirements.
GOORY Copper Roll, 6 Inches By 10 Feet
Best for: Small repair projects or custom flashing where a flat copper sheet can be cut and shaped on site. GOORY lists this roll as 6 inches wide and 10 feet long, made from C11000 copper with 28-gauge thickness. The listing states that it conforms to ASTM B152 and includes a protective film on one side.
Choose this shorter roll when the measured job does not require the longer option. It is a raw flashing material, not a preformed drip edge, so the installer must determine and create the required shape. Limitation: The listing warns against use with galvanized steel and says it does not work well with redwood or cedar. Check material contact before installation.
GOORY Copper Roll, 6 Inches By 20 Feet
Best for: Longer custom flashing runs that need the same listed copper specification as the shorter GOORY roll. It measures 6 inches by 20 feet and is described as 28-gauge C11000 copper that conforms to ASTM B152. A one-sided protective film is included to help guard the surface from scratches.
Compared with the 10-foot roll, this option provides twice the listed length and may reduce the need to join material on a longer run. Select it when the width and thickness suit the project and the flashing will be formed as needed. Limitation: It is not a pre-bent drip edge, and the same stated cautions about galvanized steel, redwood, and cedar apply.
EAGLE 1 Brown Five-Foot Drip Edge
Best for: Buyers who want a formed five-foot drip-edge section but do not require a copper finish. This selected variant is identified as brown. The listing describes a 75-degree angle, 4-inch leg, and 1.5-inch hemmed fascia edge, along with included screws, a hex bit driver, and gloves. It is listed for metal or shingle roofs.
This is a better match for a color-coordinated brown roof edge than for a project specifically requiring copper. The product description mentions copper options generally, but the selected variant name is Brown. Limitation: Do not treat this variant as copper flashing; confirm the material and finish in the listing before buying.
Buying Guide: How To Choose Copper Drip Edge Flashing
Do you need a formed edge or a copper roll?
A formed drip edge has a set profile intended for a roof perimeter. The EAGLE 1 copper option is the direct fit among these products because it is listed as preformed with a 75-degree angle and hemmed edge. Copper rolls are flat material that may be cut and shaped, but the product descriptions do not identify them as pre-bent drip edge. Choose a roll only if the installation plan accounts for forming and fastening it.
What dimensions should you verify?
Measure the roof edge and check the needed coverage before selecting a product. Compare the drip edge’s under-shingle leg and fascia edge with the roof assembly. For rolls, check both width and total length, and account for overlaps, cuts, and bends. Product dimensions alone do not confirm suitability for every roof design.
Does copper contact the surrounding materials?
Material compatibility matters. GOORY specifically cautions against using its copper flashing with galvanized steel and says it does not work well with redwood or cedar. Review the product details and consider all surfaces the flashing may touch before installation. Do not assume that copper is compatible with every roofing or framing material.
When is the longer roll the better choice?
The 20-foot GOORY roll offers more continuous length than the 10-foot version, while both are listed as 6 inches wide and 28 gauge. The Grip-Rite shield is 8 inches by 20 feet, but it is described as laminated shield material rather than a preformed edge. Compare width, thickness, profile, and material description—not length alone.
Frequently Asked Questions
Which listed product is an actual copper drip edge?
The EAGLE 1 five-foot copper variant is the clearest match. It is described as 16-ounce pure copper and has a formed roof-edge profile.
Are the GOORY rolls ready-made drip edges?
No. They are described as flat copper flashing rolls. The product information does not say they have a preformed drip-edge angle.
Is the brown EAGLE 1 option made of copper?
The selected variant is identified as brown, not copper. Confirm the exact material and finish in the listing before purchase.
What should I check before installing copper flashing?
Verify dimensions, roof profile, fastening needs, and contact with adjacent materials. The GOORY listings caution against contact with galvanized steel and note concerns with redwood and cedar.