The Basco Sopora is the closest match for a true 22-inch opening, with an adjustable stated width of 20 3/4 to 22 1/2 inches. The other options below start at 23 inches or wider, so they suit slightly larger openings rather than a standard 22-inch space. Compare your finished opening measurements, door height, and swing clearance before choosing.
| Product | Stated Width | Best For |
|---|---|---|
| Basco Sopora Pivot | 20 3/4–22 1/2 inches | Openings near 22 inches |
| Semi-Frameless Pivot | 23–24 inches | Compact spaces needing width adjustment |
| Ginlodda Frameless Pivot | 24–25 inches | Chrome finish and adjustable fit |
| Royal Guard Frameless Pivot | 24–25.4 inches | Magnetic sealing and black hardware |
| Frameless Hinged Panel | 23.6–23.8 inches | Thicker glass and two-way swing |
Basco Sopora Pivot Shower Door
Best for: A finished opening close to 22 inches. The adjustable 20 3/4- to 22 1/2-inch width is the only listed range that directly includes a 22-inch opening.
This pivot door has clear glass measuring 0.188 inch thick and a 67-inch overall height. Its walk-through width is approximately 17.44 inches, and the 1.81-inch bottom threshold is designed to repel shower water. Those dimensions are useful to check if entry clearance or a lower door height matters in your bathroom.
Limitation: The listed height is 67 inches, shorter than the 72-inch height of the other options. Confirm that this height works for your enclosure before buying.
Semi-Frameless Adjustable Pivot Door
Best for: A compact shower with a finished opening between 23 and 24 inches. It is an adjacent-size option, not a direct fit for a 22-inch opening.
The door measures 72 inches high and uses 1/4-inch tempered glass. Its one-inch width adjustment accommodates the stated range. A 180-degree pivot and reversible left- or right-side installation provide flexibility in choosing the door swing. The listed semi-arc threshold and full-length PVC strip are intended to help contain water.
Limitation: The minimum stated coverage is 23 inches. Do not assume it will fit a 22-inch opening; verify the manufacturer’s installation requirements and your finished measurements.
Ginlodda Chrome Frameless Pivot Door
Best for: A 24- to 25-inch opening where a chrome finish and outward-swinging pivot door are preferred.
This 72-inch-high door has an adjustable 24- to 25-inch width and pivots 90 degrees outward. Listed construction features include 1/4-inch tempered glass, a lightweight aluminum frame, and a 304 stainless steel handle. The product description also specifies ANSI-certified glass, R3 security corners, explosion-proof film, and an easy-clean surface.
Limitation: Its minimum width is 24 inches, making it unsuitable for a 22-inch opening unless the actual installation specifications establish a compatible fit.
Royal Guard Matte Black Pivot Door
Best for: A 24- to 25.4-inch shower opening where matte black hardware and a magnetic door seal are priorities.
The 72-inch-high door uses 1/4-inch clear tempered glass and a magnetic suction seal intended to improve closure and reduce gaps. Its listed width adjustments are 3/8 inch at the pivot and one inch on the other side. The product description gives a 19 19/32-inch walk-in opening and says to measure after the walls are finished.
Limitation: The door does not start at 22 inches. Its specified opening and adjustment range should be compared with the actual finished enclosure, including any out-of-plumb walls.
Frameless Hinged Door With 8mm Glass
Best for: A 23.6- to 23.8-inch opening where thicker glass and an inward-and-outward swing are desired.
This 72-inch-high frameless panel uses 5/16-inch tempered glass. It opens 180 degrees in or out and can be installed for left- or right-side opening. The listing specifies SGCC- and ANSI-certified glass, a full-length magnetic strip, up to 5 mm of adjustment for non-vertical walls, and a nano coating intended to make cleaning easier.
Limitation: The narrow stated width range is still larger than 22 inches. Its limited 5 mm adjustment should not be treated as a substitute for measuring the finished opening.
Buying Guide: How To Choose A 22-Inch Shower Door
How should you measure the opening?
Measure the opening after tile and other wall finishes are complete. Check the width at multiple heights, since walls may not be perfectly vertical. Compare the measurements with the product’s stated minimum and maximum installation width; nominal door size alone does not confirm fit.
Does a 22-inch opening require a 22-inch door?
Not always, but the product’s documented adjustment range must include your finished opening. In this list, the Basco Sopora range includes 22 inches. The other doors start at 23 inches or wider, so they are better considered for larger openings, not substitutes for a confirmed 22-inch fit.
What should you consider about the swing?
Pivot and hinged doors need clearance in the direction they open. Check for nearby toilets, vanities, towel bars, and walls. A reversible door can provide more installation flexibility, while an inward-and-outward swing needs enough clear space on both sides.
How do glass thickness and sealing differ?
The listed glass ranges from 0.188 inch to 5/16 inch thick. Product descriptions also identify different water-control features, including thresholds, PVC strips, and magnetic seals. Compare those details with your enclosure and follow the installation instructions; no shower door should be assumed to prevent every leak.
Frequently Asked Questions
Which listed shower door fits an opening around 22 inches?
The Basco Sopora is listed for widths from 20 3/4 to 22 1/2 inches, so its stated range includes a 22-inch opening. Verify the finished measurement and installation instructions.
Are any of the other options suitable for exactly 22 inches?
The other four products have minimum stated widths of 23 inches or more. Their listed dimensions do not identify them as fits for a 22-inch opening.
Are all five doors 72 inches high?
No. The Basco Sopora is listed at 67 inches high. The other four products are listed at 72 inches high.
Should measurements be taken before or after tiling?
Measure after the walls are finished. The Royal Guard listing explicitly instructs buyers to take measurements after finishing the walls, and finished dimensions are important for checking fit.