If you are working with 5/8-inch cement board, the products listed here are installation and cutting accessories—not cement board panels. Goldblatt is best for a tape-and-screw bundle, while Grip-Rite suits larger projects needing a bulk screw pack. The Abbesun blade is the cutting option, and the two other screw products offer smaller or feature-specific fastener choices. Check fastener length and tool fit against your board, framing, and project instructions before buying.
| Product | Best suited for | Listed quantity or feature |
|---|---|---|
| Goldblatt tape and screws | Joint reinforcement plus fastening | 150 screws and self-adhesive mesh tape |
| Hard-to-Find Fastener screws | Smaller fastening jobs | 45 steel screws |
| Abbesun fiber cement blade | Cutting fiber cement | Two blades; 5/8-inch arbor listed |
| POWERTEC cement screws | Star-drive fastening | 150 screws and T25 bit |
| Grip-Rite cement board screws | Bulk screw supply | 640 screws |
Goldblatt Tape and Cement Board Screws
Best for: DIYers who need joint tape and screws in one purchase. The set includes self-adhesive fiberglass mesh tape and 150 #8, 1-5/8-inch screws. The tape is described as alkali-resistant, tear-resistant, and designed not to shrink. The screws use a T-25 star drive and have a sharp point intended to avoid pre-drilling.
The listed applications include cement board joints and attachment to wood or light-gauge steel studs. A rust-protective coating is specified, making this set relevant to moisture-prone areas such as showers and floors. It was selected for combining two common installation supplies. Limitation: the listing does not state the tape length, so check whether the quantity covers your seams.
Hard-to-Find Fastener 1-5/8-Inch Screws
Best for: Buyers who want a modest pack of basic cement board screws. The listing specifies #8 steel screws measuring 1-5/8 inches long, with a sharp point, and provides 45 pieces. That makes the pack a smaller-quantity alternative to the 150- and 640-count options in this selection.
This product was selected for shoppers who need a straightforward screw option rather than a bundle with tape or a larger supply. Limitation: the supplied details do not identify the drive type, coating, bit, or recommended framing material. Confirm those details and whether the screw length suits your assembly before purchase.
Abbesun 5-Inch Fiber Cement Saw Blades
Best for: Buyers seeking blades for cutting fiber cement who have a compatible saw. This two-pack has 5-inch blades with four polycrystalline diamond-tipped teeth and a listed 5/8-inch arbor. The feature description also cites a thin kerf and anti-vibration design, and names fiber cement, Hardie plank, MDF, laminate flooring, and Corian among its applications.
This is the only listed cutting accessory, so it fills a different role from the fasteners. Limitation: the listed arbor size does not establish compatibility with every saw. Verify the saw’s blade diameter, arbor, and operating requirements before use. Cutting cement-based material can produce dust; follow the material and tool makers’ safety guidance.
POWERTEC #8 Cement Screws
Best for: Buyers who prefer a T25 star drive and a supplied bit. The package contains 150 #8, 1-5/8-inch screws with a Ruspert coating and high-low threads. The feature description says the threads are intended to bite into pre-drilled holes in concrete, brick, block, and masonry; it also describes the coating as corrosion-resistant.
The included T25 bit and stated rust-resistance make this a feature-rich choice among the screw-only products. Limitation: the listing emphasizes masonry and pre-drilled holes. Do not assume it is the right fastener for every cement-board-to-stud installation; confirm the intended substrate and installation method.
Grip-Rite Bulk Cement Board Screws
Best for: Larger projects or buyers who want a high screw count. The listed package contains 640 No. 8 steel screws, each 1-5/8 inches long, with Phillips wafer heads. Its count is substantially higher than the other screw packs in this list, which can help when planning multiple boards or a larger repair.
This product was selected as the bulk-quantity option. Limitation: the supplied features do not specify a coating, included driver bit, or other installation details. Check the product information and project requirements if corrosion protection or a specific drive system matters.
Buying Guide: Choosing Accessories for 5/8-Inch Cement Board
Are these products 5/8-inch cement board panels?
No. None of the five listings is a cement board sheet. They are screws, joint tape, or a saw blade. If you need panels, search for cement board by thickness, dimensions, and intended application, then confirm the manufacturer’s installation directions.
How should I compare screw options?
Compare length, gauge, head and drive type, coating, pack count, and the substrate named by the manufacturer. The listed screw products are 1-5/8 inches long, but their other documented details differ: Goldblatt includes tape, POWERTEC supplies a T25 bit, and Grip-Rite provides 640 Phillips wafer-head screws. Do not assume a screw is suitable for a specific framing material unless the listing or installation instructions say so.
When is joint tape useful?
Choose a tape-and-screw bundle if you also need mesh tape to reinforce cement board joints. Goldblatt’s listing describes self-adhesive, alkali-resistant fiberglass mesh tape. Check the required tape type and joint treatment in the cement board manufacturer’s instructions.
What should I check before buying a blade?
Match the blade diameter and arbor to your saw, and confirm the blade is intended for the material and cutting task. The Abbesun listing specifies a 5-inch blade and 5/8-inch arbor, but that alone does not confirm fit for a particular tool.
Frequently Asked Questions
Does 5/8-inch cement board mean the screws should be 1-5/8 inches long?
Not automatically. Screw selection depends on the complete assembly and the cement board manufacturer’s fastening instructions. Verify the required fastener type and length for your board and framing.
Which product includes both tape and screws?
The Goldblatt set includes fiberglass mesh cement board tape and 150 #8, 1-5/8-inch screws.
Which listing has the most screws?
Grip-Rite has the largest stated quantity in this selection, with 640 screws.
Which product has a listed 5/8-inch arbor?
The Abbesun 5-inch fiber cement blade listing specifies a 5/8-inch arbor. Confirm tool compatibility before use.