For a brushed nickel cabinet refresh, choose hardware that fits the existing holes, feels right in your hand, and comes with suitable screws. The five options below are cabinet knobs rather than bar pulls: Ravinte’s 30-pack round knobs suit larger projects, while the Asidrama and four-pack options fit smaller updates. Compare each knob’s diameter, height, pack size, and included screw lengths before ordering.
| Product | Best For | Pack Size | Listed Diameter |
|---|---|---|---|
| Ravinte Round Zinc Knobs | Coordinated, larger projects | 30 | 1-1/6 inches |
| Ravinte Disc Knobs | A slightly wider knob | 30 | 1-1/4 inches |
| homdiy Round Zinc Knobs | Multiple furniture thicknesses | 30 | 1-1/8 inches |
| Asidrama Satin Nickel Knobs | Smaller hardware updates | 10 | 1.2 inches |
| Satin Brushed Nickel Knobs | Small repairs or replacements | 4 | 1.18 inches |
Ravinte 1-1/6-Inch Round Knobs
Best for: Homeowners replacing knobs across a kitchen, bathroom, or furniture collection. This 30-pack offers a consistent round shape and brushed nickel finish for a coordinated look. The listed dimensions are 1-1/6 inches in diameter, a 2/3-inch base diameter, and 1-1/8 inches high. Its Euro-style design is intended to add a decorative detail to cabinets.
Why it was selected: The larger pack makes it a practical candidate for projects with many doors and drawers. Limitation: The product information does not list included screw lengths, so check what fasteners are supplied and whether they suit your cabinet thickness before installation.
Ravinte 1-1/4-Inch Disc Knobs
Best for: Buyers who want a wider, contemporary round knob in a 30-piece set. The zinc knobs have a brushed nickel finish, with a listed diameter of 1-1/4 inches, a 3/4-inch base, and a height of 7/8 inch. The flatter disc profile differs from a taller mushroom-style knob and may suit cabinets where a lower profile is preferred.
Each knob includes one 1-inch short screw and one 1.57-inch long screw, giving buyers two listed lengths to compare with their cabinet doors. Limitation: The product details do not specify a fit for every cabinet thickness; measure the door or drawer front before choosing a screw.
homdiy 1-1/8-Inch Zinc Knobs
Best for: Buyers furnishing multiple cabinets or pieces of furniture who want two screw lengths included. This 30-pack uses zinc alloy and a brushed nickel finish. Each round knob is listed as 1-1/8 inches across and 1 inch high. The manufacturer describes the material as durable and resistant to rust.
Two screw sizes—1 inch and 1-3/4 inches—are included, which may help when fitting different furniture thicknesses. Limitation: Confirm the selected screw length against your specific drawer or door; the listing says to contact the seller if another size is needed.
Asidrama 10-Pack Satin Nickel Knobs
Best for: Smaller projects needing ten knobs for kitchen cabinets, dresser drawers, or other furniture. The product is described as metal with a brushed satin nickel finish, and the listed diameter is 1.2 inches with a height of 1.1 inches. The set includes 1-inch and 1.77-inch screws. The manufacturer describes the knobs as easy to clean and install.
Why it was selected: Its pack size offers a middle ground between a large renovation set and a small replacement pack. Limitation: The listing advises measuring cabinet hole centers at 5 inches before purchasing handles. Since this product is described as knobs, check the product details carefully if you need bar pulls or are matching existing hardware.
Satin Brushed Nickel Four-Pack
Best for: Replacing a few knobs or updating a small cabinet, closet, bathroom, or laundry-room area. The four round knobs measure 1.18 inches in diameter and 0.86 inches high, with an 0.7-inch base. The listing includes three screw lengths—22 mm, 25 mm, and 30 mm—and says they are suitable for boards up to 25 mm thick.
The soft, clean-line design is described as a brushed nickel finish with a comfortable touch. Limitation: A four-pack may not cover a full kitchen or a large set of drawers, so count the hardware needed before ordering.
Buying Guide: How To Choose Brushed Nickel Cabinet Hardware
Do you need knobs or pulls?
Knobs attach at a single point and work on cabinet doors and many drawers. Bar pulls typically use two mounting points and are often chosen for wider drawers. The five products here are knobs, not bar pulls. If replacing two-hole pulls, measure the distance between the existing mounting holes and shop for pulls with a matching center-to-center measurement.
What size and shape should you choose?
Compare knob diameter and height with the available space and the feel you want. The listed diameters range from 1-1/8 inches to 1-1/4 inches. A flatter profile, such as the Ravinte disc option, differs from a taller round knob. For a uniform look, use one shape and size throughout a room; for a targeted repair, match the existing hardware as closely as possible.
How many knobs and which screws do you need?
Count doors and drawers before selecting a pack. A 30-pack is suited to a broad update, while a 10-pack or four-pack may fit a smaller project. Measure the cabinet front’s thickness and compare it with the included screw lengths. Do not assume one screw size fits every door or drawer.
Will brushed nickel match your other finishes?
Brushed and satin nickel descriptions can look different across products and lighting. If matching existing faucets or appliances is important, compare the finish in person when possible. Also check the knob base diameter and existing hole placement to ensure the hardware covers the mounting area.
Frequently Asked Questions
Are these products cabinet pulls?
No. The five listed products are cabinet knobs. Choose a separate bar pull product if you need a two-point handle.
Which option is best for a large cabinet project?
The Ravinte and homdiy options each come in 30-packs, making them the largest sets in this comparison.
Which product includes the most screw lengths?
The four-pack satin brushed nickel option lists three screw lengths: 22 mm, 25 mm, and 30 mm.
Should I measure before ordering cabinet knobs?
Yes. Check the cabinet or drawer thickness, existing hole placement, desired knob dimensions, and the screw lengths listed for the product.